Clipsal by Schneider Electric | Iconic Styl Cooker Dolly Rocker 23mm | Silver Satin Metallic
**DOES NOT FIT 40M32A MECHS** **ONLY FITS 40M MECHS**
The Clipsal S40CR-SV is a replacement dolly rocker for Clipsal Iconic Styl switch mechanisms, marked Cooker and finished in silver. The S40CR-SV measures 23mm high, 23mm wide and 2mm deep, and uses a clip-in fixing into the mechanism body. It is supplied as a single rocker in a polybag, with no mechanism, grid plate or cover plate included.
A cooker point takes constant handling in a working kitchen, and the rocker is the component that wears out first. Replacing a scratched, cracked or discoloured rocker costs a fraction of replacing a mechanism that remains electrically serviceable. The S40CR-SV carries the Cooker marking on the rocker face, so circuit identification survives the replacement. Its clip-in fixing means the component involves no screws, retaining springs or adhesive.
Carrying spare rockers lets a damaged cooker point be corrected during the original service visit instead of a rebooked return. The S40CR-SV is supplied as a set of one, so the ordered quantity matches what the job needs. The satin metallic silver finish maintains visual consistency with surrounding Iconic Styl accessories on the same wall plate. At 0.01kg net weight, additional spares contribute almost nothing to a service vehicle inventory.
Features
- Cooker marking — the rocker face carries a printed Cooker marking that identifies the switch as controlling a cooking appliance circuit.
- Silver satin finish — a satin surface finish with metallic surface treatment, matching the Iconic Styl aesthetic across the plate.
- Clip-in fixing — the S40CR-SV clips into the mechanism body, so no screws, clips or adhesive form part of the fixing method.
- 23mm x 23mm face — the rocker face measures 23mm high and 23mm wide, sized to the Iconic Styl aperture.
- 2mm rocker depth — a 2mm profile that adds no measurable build-up to the finished plate.
- Rocker supplied alone — no mechanism, grid plate or cover plate is included, so the part suits replacement and specification work.
- Single-unit packing — packed as a set of one in a polybag rather than a fixed multi-pack.
- 0.01kg net weight — light enough to carry several spares in a service kit without adding bulk.
- 0 to 45 degree operating range — rated for ambient air temperature between 0 and 45 degrees Celsius.
- 10 to 95 percent humidity range — rated for relative humidity between 10 and 95 percent, covering normal Australian kitchen conditions.
- 20A cooker mechanism only — the S40CR-SV suits the Iconic 20A cooker switch mechanism and does not fit the 32A cooker mechanism.
- Indoor accessory — the rocker is an internal wiring accessory and carries no weatherproof or IP rating of its own.
Where to use
- Kitchen cooker points — restores the marked rocker on a 20A cooking appliance switch without disturbing the mechanism behind it.
- Rental turnover work — a scratched or discoloured rocker can be swapped between tenancies at low cost.
- Damage and repair calls — replaces a rocker cracked during benchtop or splashback work while the mechanism stays in service.
- New Iconic Styl installs — the S40CR-SV finishes a cooker point specified in silver rather than the default plate colour.
- Kitchen renovations — brings a cooker switch into line with the silver Styl finish used elsewhere in the room.
- Van stock for service work — spare rockers let a marked point be corrected on the first visit rather than a return trip.
- Commercial kitchens and staff rooms — the S40CR-SV keeps cooking appliance switches clearly marked in shared spaces.
The S40CR-SV is a rocker only. It does not fit the 32A cooker mechanism, and it is not a substitute for a mechanism, grid plate or cover plate. The rocker carries no IP rating of its own and is not suitable for outdoor or damp exposed locations.
