Skip to main content
Get $15 Prezzee on $150 MAX9 or Clipsal Lighting | FREE Clipsal Shipping $330+ View

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Clipsal by Schneider Electric | 4 Pin Extension Socket 10A 500V 56 Series | IP66 Three-Phase

        The Clipsal 56CSC410-EO is a 4 pin industrial extension socket rated 10A at 500V, part of the Clipsal 56 Series pin-and-sleeve range. The 56CSC410-EO uses a 3P + E (three-phase plus earth) configuration and carries an IP66 rating for wet and dust-exposed sites. It complies with AS/NZS 3120 and forms the socket end of a three-phase industrial extension lead.

        Portable three-phase equipment on a jobsite needs a socket that can take water, dust, and rough handling without failing. A standard domestic outlet cannot carry a 500V three-phase load or survive an outdoor tie-in. The 56 Series connector gives an IP66 sealed termination that lands on the end of a flexible lead, with screw terminals sized for 1 to 6 mm² conductors.

        Licensed electricians use the 56CSC410-EO to make up custom three-phase leads for pumps, compressors, and temporary site power. The screw terminals and M25 cable gland accept round cable from 7 to 16 mm across, so a sparky can build a lead to length on the bench. The polycarbonate housing and brass contact sleeves take repeated plugging on hire gear and site distribution.

        Features

        • 4 pin 3P + E layout — the 56CSC410-EO carries three active phases plus earth for 500V three-phase equipment, with no neutral pin.
        • 10A rated current — suits three-phase loads drawing up to 10 amps per phase, such as small pumps and compressor sets.
        • 500V rated voltage — matched to standard Australian three-phase site and industrial supply.
        • IP66 sealed rating — blocks dust and heavy water jets, so the socket connector holds up in outdoor and washdown areas.
        • Screw terminals 1 to 6 mm² — take a range of conductor sizes for making up leads to the required current draw.
        • M25 cable gland entry — accepts round flexible cable from 7 to 16 mm outer diameter with a sealed grip.
        • Polycarbonate housing — the 56CSC410-EO body takes impact and weather on active jobsites.
        • Brass contact sleeves — carry current across repeated connect and disconnect cycles on hire and site gear.
        • Straight inline body — external mounting design lands on the end of a portable lead rather than on a wall.
        • Wide operating range — rated for ambient temperatures from -25 to 75 degrees C across cold stores to hot yards.
        • No earth leakage protection — the socket carries no built-in RCD, so upstream earth leakage protection is required on the circuit.

        Where to use

        • Temporary site power — the 56CSC410-EO terminates three-phase leads feeding site sheds, distribution boards, and tools.
        • Pumps and compressors — provides a sealed three-phase connection point for portable pump and compressor sets.
        • Hire and rental equipment — used on made-up leads that plug and unplug often across different sites.
        • Outdoor and washdown areas — the IP66 rating suits yards, wash bays, and exposed work zones.
        • Farms and rural sheds — connects three-phase machinery where fixed outlets sit out of reach.
        • Workshops and factories — makes up extension leads for benches and machinery on 500V supply.

        The 56CSC410-EO is not a domestic power point and does not suit single-phase 240V general power outlets. It carries no switch and no built-in earth leakage protection, so it must not replace an RCD-protected socket where one is required. Do not submerge the connector; the IP66 rating covers water jets, not immersion.

        (56CSC410-EO)

        The Clipsal 56CSC410-EO complies with AS/NZS 3120 for cord extension sockets and carries an IP66 rating to AS 60529. It is rated for 500V three-phase supply at 10A and is intended for installation by a licensed electrician.

        The screw terminals accept conductors from 1 to 6 mm2, and the M25 gland takes round flexible cable from 7 to 16 mm outer diameter. Tighten the gland fully to seal the cable entry and keep the IP66 rating on the finished lead.

        The 56CSC410-EO is a 4 pin 3P + E socket connector that mates with a matching 56 Series 4 pin 10A plug, such as the Clipsal 56P410. Both parts share the same pin pattern, so the lead connects and locks together correctly.

        The four pins carry three active phases plus earth (3P + E), which suits 500V three-phase equipment. There is no neutral pin. This differs from a five-pin socket, which adds a neutral for loads that need one.

        The connector uses a polycarbonate housing and brass contact sleeves rated for ambient temperatures from -25 to 75 degrees C. The IP66 seal keeps out dust and water jets, which helps it last through outdoor and washdown use.

        The Clipsal 56CSC410-EO carries a 1 year warranty for both domestic and commercial use, handled through Clipsal in-home warranty from the invoice date. Warranty cover applies only when the product is installed by a licensed electrician.

        No RCD is built into the connector, so earth leakage protection must be provided upstream on the circuit feeding the lead. For a socket with onboard protection, a switched RCD-protected outlet such as the NLS 66CV432RCD is a separate option.

        The 56CSC410-EO is a 4 pin 3P + E connector for 500V three-phase supply, not a single-phase 240V power point. It should not be wired to a 240V single-phase circuit. For single-phase portable power, use a socket rated for 240V single-phase instead.

        The Clipsal by Schneider Electric 56CSC410-EO is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Clipsal in home warranty

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Clipsal by Schneider Electric
        SKU 56CSC410-EO
        Model # 56CSC410-EO
        Barcode # 9311554198374
        Package Weight 0.311kg
        TYPE VALUE
        Type Industrial Outlets
        Brand Clipsal by Schneider Electric
        Range 56 Series
        Colour Orange
        Rated Current (A) 10
        Height (mm) 90
        Width (mm) 90
        Depth (mm) 173
        Number Of Outlets 1
        Mounting External Mounting
        Voltage (V) 500
        Number of Poles 3P + E
        IP Rating IP66
        Pin Number 4

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products