Clipsal by Schneider Electric | 7W Tri-Colour Dimmable LED Downlight | Ripple Resistant | 90mm Hole
The Clipsal TPDL1C3R is a 7W tri-colour dimmable LED downlight rated 240V AC 50Hz, designed for 90mm ceiling cut-outs and featuring ripple-resistant filtering technology. The TPDL1C3R is IC-4 rated and complies with AS/NZS 60598.2.2 standard.
Domestic lighting retrofits and new-build fit-outs often face unpredictable power supply conditions. In many Australian areas, supply companies use ripple control signals to manage peak tariff rates, which can cause visible flicker on standard LED downlights. The TPDL1C3R addresses this constraint with enhanced filtering circuitry, ensuring stable, consistent light output even when supply ripple voltages are present. This makes the unit a practical choice for residential upgrades where supply-side interference is common.
Electricians and builders value the TPDL1C3R for its three selectable colour temperatures and smooth dimming across all levels. The tri-temp switch allows instant colour selection (3000K warm, 4000K neutral, 6000K cool) without dimmer complications, while compatible dimmer integration with Clipsal 30, 40, and 60 series rotary dimmers delivers stable control. The ripple-resistant design eliminates the flicker complaint callbacks common with basic LED downlights in ripple-controlled zones, reducing warranty claims and improving customer satisfaction.
Features
- Ripple-resistant filtering — reduces flicker from supply-line ripple voltages used for tariff control, ensuring stable performance across all colour temperatures and dimming levels.
- Tri-colour switchable — select 3000K, 4000K, or 6000K at the fitting without dimmer reconfiguration, allowing flexibility for different rooms and moods.
- 7W power consumption — delivers 750 lumens across all colour temperatures with 22% lower energy draw than equivalent halogen downlights.
- IC-4 rated — safe to install against timber, walls, and ceiling insulation; no thermal clearance required, simplifying ceiling retrofit installations.
- 110° beam angle — wide spread provides even light coverage across typical room sizes without dark spots or hot zones.
- IP44 front protection — suitable for covered outdoor areas like eaves and patios; not rated for direct rain exposure.
- 50,000-hour LED lifespan — rated for 15+ years of normal household use before output noticeably diminishes.
- Dimmable — smooth dimming down to low levels with compatible Clipsal rotary or Wiser Bluetooth dimmers; no flicker even at low settings.
- Compact 55mm mounting depth — fits within standard ceiling joists; minimal preparation needed on renovation fit-outs.
- 90mm standard cut-out — matches existing ceiling box dimensions on most domestic retrofit work; no enlargement of opening required.
- Optional trims available — brushed chrome (TPDL1T3BC) and black (TPDL1T3BK) metal trims clip on for customisation without rewiring.
- 3-year warranty — Clipsal manufacturer warranty covers defects in materials and workmanship.
Where to use
- Domestic lighting retrofits — ideal where tariff ripple control is active; eliminates the flicker frustration that occurs with standard LEDs when supply companies switch rates.
- New-build residential fit-outs — three colour temps provide flexibility to spec warm light in living areas, cool light in kitchens, and daylight in workspaces from a single SKU.
- Kitchen and dining light — 750 lumens and wide 110° beam suit ambient general lighting in residential kitchens; pairs well with multiple downlights.
- Living and bedroom areas — tri-temp switching and dimming allow occupants to adjust colour and brightness for different times of day and activities.
- Renovations and extensions — low thermal output and IC-4 rating make the TPDL1C3R straightforward to install in insulated ceilings; quick retrofit with standard 90mm cut-out.
- Covered outdoor areas — IP44 front protection suits eaves, pergolas, and carports where direct rain is blocked but damp conditions occur.
- Commercial residential spaces — holiday rentals, aged care facilities, and student accommodation benefit from consistent light quality and reduced maintenance callbacks.
The Clipsal TPDL1C3R is not suitable for direct outdoor rain exposure, fully submerged or water-jet applications, or high-temperature environments above rated thermal limits. It is not recommended for use in unshielded outdoor or fully exposed wet areas; install only in sheltered indoor or covered outdoor locations.
Verified Sparky Direct customer reviews: Clipsal TPDL1C3R (TPDL1C3R)
"Local wholesaler charge $32 for these if you can get them, always try to slip in rubbish, they fit they work and even with the unstable power we have can expect a few years out of them." — Hantu
"Good Product" — Ben
"Good quality light that never disappoints the client can never go wrong with clipsal" — Buchanan Projects
