Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Connected Switch Gear | GEO Series 1 Gang Slimline Light Switch 10AX 250V | Matte Black

        The Connected Switch Gear LS101VMB-L is a 1 gang vertical light switch rated 10AX at 250V AC, built on a 6.5mm slimline plate in a matte black finish. The LS101VMB-L uses a two-way switch mechanism, so it wires as either a single-point or a two-point control. It is SAA approved and complies with AS/NZS 3100:2017+A1-3 and AS/NZS 3133:2013+A1-2.

        Matte black hardware is specified across kitchen, hallway and new-build schedules, but the finish generally arrives on a conventional plate that stands proud of the plasterboard. The consequence is a visible step alongside flush joinery and dark tapware. The LS101VMB-L carries a 6.5mm slimline polycarbonate plate in matte black. That profile keeps the mechanism tight against the wall surface. The plate measures 115mm x 77mm and conceals a 76mm x 55mm cut out.

        Where the existing aperture corresponds, a plate replacement during repainting or refurbishment avoids plaster remediation entirely. The mechanism is rated 10AX and uses composite silver nickel contacts that resist arcing under repeated operation. Terminals and terminal screws are solid brass. The rear terminals take the conductors landing at the switch position. Connected Switch Gear backs the LS101VMB-L with a 5 year in-house warranty covering replacement product and installation cost.

        Features

        • 6.5mm slimline plate — the plate stands only 6.5mm off the wall surface, holding a flat profile against plaster, tile or panelling.
        • Matte black finish — a low-reflectivity black plate that sits alongside black tapware, joinery pulls and dark splashbacks.
        • 10AX 250V AC rating — the mechanism is rated 10AX at 250V AC with a 50/60Hz frequency rating.
        • Two-way switching — the LS101VMB-L mechanism wires as a one-way or two-way switch, covering hallway and stairwell pairs from one part number.
        • Virgin polycarbonate plate — the material will not yellow or fade over time, so the matte black holds its colour on sun-facing walls.
        • Composite silver nickel contacts — the contact coating resists arcing across the switching life of the mechanism.
        • Solid brass terminals — the terminals and terminal screws are made from solid brass.
        • Copper phosphorus bronze internals — the internal current-carrying components are copper phosphorus bronze.
        • 115mm x 77mm plate size — the LS101VMB-L plate covers a 76mm x 55mm cut out on a 115mm x 77mm footprint.
        • SAA approved — complies with AS/NZS 3100:2017+A1-3 and AS/NZS 3133:2013+A1-2 for the Australian market.
        • 5 year in-house warranty — Connected Switchgear covers the cost of replacing the product and its installation if a fault develops within five years.
        • No listed IP rating — the LS101VMB-L carries no IP rating on the datasheet, so it is an interior fitting only.

        Where to use

        • Hallways and stairwells — the two-way mechanism in the LS101VMB-L lets a single lighting point be switched from either end of the run.
        • Bedrooms and living areas — a single lighting circuit controlled from one plate, with the matte black reading cleanly against painted walls.
        • Kitchen and butler's pantry entries — pairs with black tapware, handles and appliance trims already specified through the joinery schedule.
        • Renovation plate swaps — the 115mm x 77mm plate covers the existing 76mm x 55mm cut out, so the wall does not need patching.
        • New residential builds — the LS101VMB-L suits builds where the electrical schedule calls for a black finish across every switch position.
        • Display homes and unit fit outs — the slimline profile keeps switch positions consistent through a repeated floor plan.

        The LS101VMB-L is an interior switch plate for dry wall positions. It carries no listed IP rating and is not weatherproof, so it should not be installed on outdoor walls, pool surrounds, or in damp exposed locations such as unventilated shower zones. The mechanism is rated 10AX at 250V AC, and loads above that rating sit outside its scope.

        (LS101VMB-L)

        The LS101VMB-L is SAA approved and complies with AS/NZS 3100:2017+A1-3 and AS/NZS 3133:2013+A1-2. It is rated 250V AC at 50/60Hz with a 10AX switch mechanism.

        Installation must be carried out by a licensed electrician. The switch plate covers a 76mm x 55mm cut out on a 115mm x 77mm footprint, and conductors land on solid brass rear terminals. Warranty cover is void if the product is not installed by a licensed electrician.

        The switch mechanism supports two-way switching, so one lighting point can be controlled from two positions such as either end of a hallway or stairwell. The same part wires as a one-way switch where only a single control position is needed.

        The GEO Series plate is 6.5mm thick, against roughly 13mm on a standard-profile plate in the same brand's range. The plate is virgin polycarbonate in a geometric shape, available in white, black and matte black, with optional brushed brass and brushed aluminium cover plates.

        The plate is moulded from virgin polycarbonate, which does not yellow or fade with age. Internal current-carrying parts are copper phosphorus bronze, and the switch contacts use a composite silver nickel coating to resist arcing through repeated operation.

        Connected Switchgear provides a 5 year in-house warranty. If a fault develops within that five year period, Connected Group Australia covers the cost of replacing the product and its installation, subject to the manufacturer's terms and conditions.

        The datasheet lists no IP rating for this switch, so it is an interior fitting. Do not install it on outdoor walls, in pool surrounds, or in damp exposed positions such as unventilated shower zones. Dry interior wall positions are the intended application.

        The Connected Switch Gear LS101VMB-L is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        5 Year In-House Warranty
        Warranty Method: Connected Switch Gear In-House Warranty

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Connected Switch Gear
        SKU LS101VMB-L
        Model # LS101VMB-L
        Barcode # 9337286002475
        Package Weight 0.057kg
        TYPE VALUE
        Type Switch
        Brand Connected Switch Gear
        Range GEO Series
        Colour Matte Black
        Rated Current (A) 10AX
        Height (mm) 115
        Width (mm) 77
        Number of Switches / Gangs 1
        Plate Thickness (mm) 6.5
        Rated Voltage (V) 250

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products