Martec | Flow Small Square Exhaust Fan 240mm 45W 240V | With LED Tricolour Light White
The Martec MXFLFS25W is a small square ceiling exhaust fan with integrated LED tricolour light, rated 45W and 240V for hardwired installation in bathrooms and laundries. The MXFLFS25W extracts air at 390m³/hr using a turbo fan blade design and supplies 950–1000 lumens of selectable colour temperature lighting (3000K warm white, 4000K cool white, 5000K daylight). Installation requires a minimum ceiling depth of 210mm and suits compact bathroom spaces where low-profile mounting is essential.
Fitting an exhaust fan with integrated lighting into a small bathroom ceiling is always a compromise between ductwork clearance, cavity depth, and lighting output. Renovators and sparkies typically resort to separate fans and light fittings or accept undersized units. The MXFLFS25W solves this by fitting into a standard 240mm square cutout—tight enough for modern bathroom fitouts—while delivering rapid air extraction (390m³/hr) and full-spectrum lighting without requiring two separate circuits.
Bathroom exhaust with LED light in a single unit cuts installation time, reduces troubleshooting, and gives reno customers one colour-selectable light source that controls moisture. Sparkies stock it for rapid-turnaround jobs where space and ceiling depth are the limiting factors. The low-profile fascia means no retrofit complications, and the 2-year warranty covers both the fan and light assembly, simplifying warranty claims for customers.
Features
- Turbo fan blade design — extracts air at 390m³/hr for rapid humidity removal in small to medium bathrooms and laundries.
- LED tricolour light integrated — single unit delivers 950–1000 lumens (varies by colour temperature) with selectable 3000K, 4000K, or 5000K output, eliminating the need for a separate ceiling light.
- Ultra-low profile fascia — minimum 210mm ceiling depth required, ideal for tight renovations and apartment installations where cavity depth is constrained.
- 240mm square cutout — standard sizing suits modern bathroom fitouts; 125mm diameter ducting outlet with built-in draft stopper.
- IPX2 water-resistant rating — approved for bathroom humidity and moisture exposure without submersion or direct water jets.
- Hardwired mains installation — 45W power consumption, 220–240V 50/60Hz, fitted with 1 metre of flex and plug included.
- ABS plastic housing and fascia — easily removable grill for maintenance and cleaning; modern finish in white.
- Thermal overload protection — built-in safeguard against motor burnout from long running or restricted airflow.
- Quiet operation — decibel rating ≤40dB, suitable for bedrooms and living areas as well as bathrooms.
- 2-year replacement warranty — covers manufacturing defects on fan motor and LED light; void if installed by unlicensed installer.
- Optional remote control compatible — Martec MBHREM bathroom remote (sold separately) can control fan speed and light colour selection.
- Indoor ceiling installation only — not rated for external walls, damp exposed locations, or outdoor use; suitable for bathrooms and internal laundries only.
Where to use
- Small to medium bathrooms — the 390m³/hr extraction suits bathrooms where rapid moisture control is essential before mould takes hold.
- Compact bathroom spaces with tight ceiling cavities — the 210mm minimum depth requirement and small 240mm square cutout are ideal for renovations where building height limits deep recesses.
- Ensuite bathrooms and powder rooms — the integrated light eliminates a separate downlight circuit, ideal where wiring space is tight or aesthetics demand a single ceiling fitting.
- Bathroom and laundry combined spaces — efficient air extraction handles both moisture sources (shower steam and laundry drying vapour) with one unit.
- Modern apartment and townhouse fitouts — low-profile design suits contemporary interiors; single fitting delivers exhaust and light without visual clutter.
- Renovation work with retrofit constraints — drops straight into standard cavity dimensions; no need for custom ducting or oversized rough-in cavity.
The Martec MXFLFS25W is not suitable for external installation, outdoor wet areas, or damp exposed locations. It is rated for indoor bathrooms and internal laundries only (IPX2 rating). Installation requires a minimum ceiling depth of 210mm and must be carried out by a licensed electrician; it is not suitable for shallower cavity installations.
Verified Sparky Direct customer reviews: Martec MXFLFS25W (MXFLFS25W)
"Exactly the right cutout and specs I needed, friendly and prompt service." — Daniel
