NLS | 200W LED Highbay Light 5000K 22000lm | IP65
The NLS 20398 is a 200W LED highbay light rated 240V, producing 22,000 lumens at a 5000K cool white colour temperature. The 20398 uses an IP65-rated aluminium housing that resists dust and water jets, suiting indoor and covered outdoor industrial areas. It ships with a fitted three-pin plug and a 120 degree beam angle for wide, even coverage across high-ceiling floors.
Ageing metal-halide and fluorescent highbays draw heavy power, run hot, and lose output before they fail. Across tall warehouse and workshop installations, that means dim aisles, frequent lamp replacements, and rising energy costs. The NLS 20398 replaces that load with 200W of LED draw and 22,000 lumens of consistent 5000K illumination, reducing both running cost and maintenance access.
For sparkies fitting out a commercial shed or industrial unit, the 20398 installs quickly. It arrives with a three-pin plug on a flexible tail, so it hangs from a catenary or hook and connects to a nearby GPO without hard-wiring. The IP65 aluminium enclosure handles dust and washdown splash, and the 120 degree beam spreads illumination evenly, so fewer fittings cover the same floor area.
Features
- 200W LED output — the 20398 draws 200W to produce 22,000 lumens, covering large floor areas from a single fitting.
- 5000K cool white — a bright, neutral-cool colour temperature that lifts contrast and task visibility across a work floor.
- 22,000 lumen output — high total output suited to high-ceiling bays where lower-lumen fittings leave dark patches.
- IP65 sealing — the aluminium housing is sealed against dust ingress and low-pressure water jets, so it holds up in dusty and wash-down areas.
- Not submersible — IP65 covers dust and water jets only; the 20398 is not rated for immersion or high-pressure jetting, and is not a pool or underwater fitting.
- Aluminium housing — the metal body draws heat away from the LED array, which supports output over a long service life.
- 120 degree beam angle — a wide spread that throws even light down and out, reducing the number of fittings needed per bay.
- Three-pin plug supplied — the 20398 comes with a fitted plug on a flex tail, so it connects to a standard GPO without hard-wiring at each point.
- 240V mains operation — runs on standard single-phase 240V supply, matching typical commercial and light-industrial power.
- Low-maintenance LED — no lamp or starter to replace, cutting relamping trips in hard-to-reach high bays.
- Indoor and covered outdoor use — suited to enclosed and sheltered areas, with the IP65 rating handling dust and splash exposure under cover.
Where to use
- Warehouses and storage — the 20398 lights high-racked aisles and open floor with even coverage from mounting heights typical of storage bays.
- Workshops and manufacturing — bright 5000K output improves clarity at benches, machinery, and assembly lines where fine detail matters.
- Commercial and industrial fit-outs — a straightforward IP65 highbay for new sheds, units, and light-industrial spaces on standard 240V supply.
- Loading docks and covered yards — the IP65 body suits sheltered outdoor bays exposed to dust and occasional splash.
- Gyms and large halls — the 20398 covers open high-ceiling spaces where a wide beam keeps light even across the floor.
- Barns and rural sheds — the plug-and-hang fitting suits farm workshops and machinery sheds with a nearby power point.
The NLS 20398 is not rated for immersion, high-pressure washdown, or fully exposed outdoor weather without cover. It is a high-mounting bay light, so it is not suited to low task areas, enclosed wet rooms, or hazardous atmospheres. Check the mounting height and supply against the job before ordering.
