Search Results:
Search Results:
Search Results:
Search Results:
The Rinnai HSNRTX35 is a reverse cycle inverter split system rated 3.5 kW cooling and 4.0 kW heating. The HSNRTX35 pairs the HINRTX35 indoor head with the HONRTX35 outdoor unit, charged with R32 refrigerant. Capacity figures follow AS/NZS 3823.2 testing, and the indoor unit carries built-in Wi-Fi.
A 3.5 kW unit sits between bedroom and living room duty, and that call is easy to get wrong. The HSNRTX35 covers 16 to 23 square metres under a 2.6 metre insulated ceiling. That span suits a large bedroom, a study or a mid-sized lounge. Inverter control holds the setpoint by varying compressor speed instead of cycling hard on and off. Dehumidifying mode pulls up to 1.7 litres an hour out of the room on humid summer running.
The HONRTX35 ships charged for 15 metres of pipe, takes 25 metres maximum, and allows 10 metres of vertical separation. Maximum input power is 2300 W with a 10 A current draw across cooling and heating. GoldGuard coil coating on the outdoor unit adds corrosion protection for coastal and harsh sites.
The longest carton runs 887 mm, and the two boxes together come to 39.1 kg. Check that the vehicle or trailer takes both cartons before collecting. The outdoor unit must stay upright in transit and cannot be laid on its side.
The HSNRTX35 is not rated for outdoor ambient below -15 degrees Celsius, and heating output falls as the outside temperature drops toward that limit. It is sized for 16 to 23 square metres, so larger open-plan areas sit outside its capacity. Refrigerant and electrical work make this a licensed install, not a DIY fit-off.
(HSNRTX35)
The HSNRTX35 is sized for 16 to 23 square metres under a 2.6 metre insulated ceiling. That covers a large bedroom, a study or a mid-sized lounge. Ceiling height, insulation, window area and orientation all shift the real figure, so confirm the heat load before ordering.
Power goes to the outdoor unit at 220 to 240 V, single phase, 50 Hz. Maximum input power is 2300 W, with a 10 A current draw across cooling and heating. A licensed electrician confirms spare switchboard capacity and runs the circuit with RCD protection to AS/NZS 3000.
No. The refrigerant work needs a licensed refrigeration mechanic holding an ARC tradesperson licence, and the electrical connection needs a licensed electrician. Rinnai requires installation by a licensed tradesperson for warranty cover to apply, so a DIY install puts that cover at risk.
Wi-Fi is built into the indoor unit, with no adapter to add. Pairing runs through the NetHome Plus app on iOS or Android, either by Bluetooth scan or by putting the unit into AP mode. The app handles remote control, weekly schedules, a sleep curve and the delay timer.
Yes. The Share Device function in NetHome Plus puts up a QR code that other household members scan from their own account, giving each of them control. The unit connects on the 2.4 GHz band and supports WPA-PSK, WPA2-PSK and WPA3-SAE encryption, so point it at a 2.4 GHz network.
Rinnai supplies the TX Series with a 7 year residential warranty, subject to the terms in the Rinnai air conditioner warranty booklet. Installation by licensed tradespeople is a condition of cover. Keep the tax invoice and the installer's commissioning paperwork for any claim.
Outdoor ambient limits run from -15 to 24 degrees Celsius in heating, and -15 to 50 degrees in cooling. Heating output falls as the outdoor temperature drops. In cold inland zones, size to the heating load rather than the cooling load.
Two cartons. The indoor head measures 375 x 875 x 288 mm at 11.1 kg gross. The outdoor unit measures 610 x 887 x 337 mm at 28.0 kg gross. Check that the vehicle or trailer can take both before the trip. Carry and transport the outdoor unit upright; do not lay it on its side.
You can purchase the Rinnai HSNRTX35 online from Sparky Direct. Delivery is available to select postcodes — just check the product page to see if yours is covered. If your area isn't covered for delivery, click-and-collect from Caboolture, Queensland is available.
100-Day Fuss-Free Returns
We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.
If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.
All products come with a manufacturer’s or supplier’s warranty
Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.
Contact us via our chat to arrange the return.
Exclusions
We can’t accept returns for:
How to Request a Return
Warranty
Manufacturer Warranty: 7 Years
Not intended or designed for commercial use.
Key Specifications
Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.
Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.
Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.
Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.
For website terms and conditions https://www.sparkydirect.com.au/terms-of-use
Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.