Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        SAL | Steward Emergency Lighting Test Switch 16A 4 Pole 240V | 90 and 120 Minute Test

        The SAL SEL416TS is a 240V four-pole emergency lighting test switch rated 16A, built to the Steward series on a conventional 35mm DIN rail profile. It runs 90 and 120 minute test functions with LED indicators and a lockable key control. The SEL416TS is a Class II double-insulated device that draws 2 watts in standby.

        Emergency lighting in commercial buildings must be discharge-tested at set intervals to confirm the batteries hold up when mains power drops. Doing this by pulling the main feed is slow and hard to log accurately. The SEL416TS sits on the switchboard and isolates the emergency circuit through a 240V-rated 4-pole 16A relay, so the check runs from one lockable key switch with 90- and 120-minute test functions.

        For contractors maintaining emergency lighting, the SEL416TS keeps scheduled testing quick and repeatable across a building. The 35mm DIN rail profile mounts alongside the board's other protective devices, and the 4mm2 terminals take standard circuit wiring without adaptors. Front-panel LEDs give a clear reading at the board, and the lockable key stops a test being triggered by anyone but the appointed maintainer.

        Features

        • 16A 4 pole switching — the SEL416TS uses a 240V rated four-pole 16A relay to isolate the full emergency lighting circuit during a test.
        • 90 and 120 minute tests — two timed discharge functions cover the common emergency lighting durations specified for commercial installations.
        • LED status indicators — front-panel LEDs show status, isolation, and the active 90 or 120 minute test at a glance.
        • Lockable key function — a key test control blocks unauthorised operation, so only the maintainer can start or reset a test.
        • 35mm DIN rail mount — the SEL416TS clips onto a conventional 35mm DIN rail beside the board's other protective devices.
        • 4mm2 terminals — the terminals accept 4mm2 conductors for the 240V 4 pole 16A wiring without extra adaptors.
        • Class II construction — the double-insulated design needs no separate earth connection to the device body.
        • 2 watt consumption — the switch draws only 2 watts in standby, keeping its own load on the circuit low.
        • IP20 rated — the SEL416TS is IP20 rated for indoor switchboard enclosures, not for exposed or damp locations.
        • Green body — the green housing marks the unit as an emergency lighting control on a populated board.
        • Interior use only — rated for interior commercial designs at ambient temperatures from 0 to 40 degrees C, not for outdoor mounting.
        • Compact footprint — measures 65mm long, 75mm wide, and 60mm high, fitting a standard distribution board layout.

        Where to use

        • Commercial emergency lighting — the SEL416TS controls scheduled discharge testing of emergency and exit lighting in offices and retail fitouts.
        • Switchboard mounting — installs on a 35mm DIN rail inside a distribution board serving the emergency lighting subcircuit.
        • Scheduled maintenance testing — suits routine emergency lighting checks that call for a full 90 or 120 minute discharge.
        • Multi-tenant buildings — the lockable key limits test control to the appointed maintainer across shared commercial floors.
        • Retrofit on existing boards — the DIN rail profile lets the SEL416TS drop into an existing board where a dedicated test point is being added.
        • Facility and building management — gives a fixed, repeatable test control point for sites under an emergency lighting maintenance contract.

        The SEL416TS is not rated for outdoor or damp locations and its IP20 body suits enclosed indoor switchboards only. It is an emergency lighting test switch, not a general isolator and not a substitute for the circuit protection on the board. Installation and testing must be carried out by a licensed electrician.

        (SEL416TS)

        The SEL416TS provides 90 and 120 minute timed discharge functions used for routine emergency lighting testing in commercial buildings, isolating the circuit through a 240V four-pole 16A relay. Confirm the test regime and intervals for your site against the current AS/NZS 2293 maintenance requirements.

        The switch clips onto a conventional 35mm DIN rail inside a switchboard. Its terminals accept 4mm2 conductors for the 240V four-pole 16A connection. As a Class II device it needs no earth to the body. Installation must be carried out by a licensed electrician.

        The two functions run timed discharge tests of 90 and 120 minutes, matching common rated durations for emergency and exit luminaires. Front-panel LEDs indicate status, isolation, and the active test, so the result can be read at the board without extra instruments.

        The SEL416TS is rated at 240V AC and switches up to 16A across four poles, drawing 2 watts in standby. The four-pole relay lets it isolate the active and neutral conductors of the emergency lighting circuit for the duration of a test.

        SAL supplies the Steward SEL416TS with a three-year commercial warranty covering manufacturing defects. Keep proof of purchase and follow the installation guidance to maintain cover. Warranty claims are handled through SAL or the point of purchase.

        The test switch is IP20 rated and built for interior commercial switchboards only, so it is not suitable for outdoor, wet, or damp exposed locations. Mount it inside an enclosed distribution board within an ambient range of 0 to 40 degrees C.

        The SAL SEL416TS is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date


        Commercial Use: 3 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand SAL
        SKU SEL416TS
        Model # SEL416TS
        Barcode # 9328623140073
        Package Weight 0.289kg
        TYPE VALUE
        Type Emergency Lighting
        Brand SAL
        Rated Current (A) 16
        Height (mm) 60
        Width (mm) 75
        Length (mm) 65
        Voltage (V) 240
        Wattage (W) 2
        Number of Poles 4
        IP Rating IP20

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products