Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Schletter | Rapid Pro L Roof Mount | Aluminium Trapezoidal/Corrugated

        The Schletter Rapid Pro L (119026-122) is a pre-assembled roof mounting fastener for solar panels on pitched non-concealed roofs with trapezoidal and corrugated profiles. The 119026-122 is compatible with both ProLine and Standard rails and fixes directly into timber or metal roof structure with optimised load distribution across the roof sheet.

        Roof-mounted solar systems on existing corrugated or trapezoidal metal roofs often face challenges with load concentration on the roof sheet itself, risking deformation or leak paths. The Rapid Pro L solves this through its optimised base length and fastening geometry, which distributes forces evenly into the underlying substructure. Installers value the pre-assembled multi-adapter design and UV-resistant EPDM sealing rubber because they reduce on-site assembly time and guarantee water tightness without additional site-made seals.

        Solar installers and roofing contractors favour the Rapid Pro L for its height-adjustable rail seat, which allows panel clearance to vary based on roof profile without requiring multiple fastener SKUs. The stainless steel hardware and aluminium body eliminate corrosion concerns on exposed roofs, and the 25-year warranty aligns with solar panel longevity, making it a long-term solution on residential and commercial jobs. Installation is straightforward with standard tools (TORX T40, M14 socket) and follows structural analysis per AS/NZS 1170.2-2011 and DIN EN 1991-1 for Australian wind and snow loads.

        Features

        • Pre-assembled multi-adapter — the 119026-122 arrives ready to install with the clamping part, bolt, rubber compression spring, and EPDM underlay pre-fitted, eliminating loose parts and assembly errors on the roof.
        • Dual-rail compatibility — adapter works with both ProLine and Standard rail profiles, allowing installers to stock one fastener SKU and use it across multiple solar platform specifications.
        • Height-adjustable rail seat — allows panel-to-roof clearance to be set based on the specific trapezoidal or corrugated profile, reducing the need for spacers or shimming on site.
        • Optimised load distribution — the Rapid Pro L's base length and fastening geometry spread forces across a wider roof sheet area, minimising stress concentration and reducing the risk of deformation on thin metal profiles.
        • UV-resistant EPDM rubber underlay — factory-bonded 30x3x55mm self-adhesive rubber seal guarantees water tightness and survives long-term sun exposure without degradation or hardening.
        • Stainless steel hardware — M8x35 bolt and fastening components are A2-70 stainless steel, rated for coastal and corrosive environments without rust or material failure.
        • Aluminium fastening body — lightweight and corrosion-resistant, the aluminium clamping part and base structure will not degrade over the 25-year warranty period on exposed roofs.
        • Structural compliance — designed and tested to AS/NZS 1170.2-2011 (Australian/New Zealand wind/snow loads) and DIN EN 1991-1 (Eurocode-based analysis), meeting general construction approvals.
        • 25-year warranty — Schletter covers the 119026-122 against material and workmanship defects for 25 years, aligning with modern solar panel warranties and reducing long-term maintenance call-backs.
        • Simple tooling requirement — installation uses only TORX T40 hex key and M14 socket, eliminating the need for specialised fastening tools or torque-limiting equipment on site.
        • Trapezoidal and corrugated compatible — the Rapid Pro L is rated for both common non-concealed roof profiles, whether landscape or portrait orientation, without variant selection or design engineering per roof type.
        • Not for concrete roofs — the Rapid Pro L is rated for timber and metal substructure only; concrete roof applications require different fastening solutions and structural analysis.

        Where to use

        • Existing corrugated metal roofs — the Rapid Pro L (119026-122) is the standard retrofit fastener for residential and commercial solar installations on older and newer metal sheet roofs, where direct screw fixing to the purlin is the install method.
        • Trapezoidal metal roofing — industrial and agricultural buildings with trapezoidal roof profiles use the Rapid Pro L for solar arrays; the height-adjustable seat accommodates the profile variation without custom spacers.
        • Pitched roof geometry — the fastener is designed for non-horizontal roofs where rain runoff is gravity-driven; the EPDM rubber and load distribution prevent water pooling and sheet deformation on slopes up to steep pitch angles.
        • Timber and metal substructure — the Rapid Pro L fixes to timber purlins (common in older residential roofs) or metal structural purlins (commercial and industrial) with the same fastening geometry.
        • Wind and snow load regions — the 119026-122 is engineered to AS/NZS 1170.2-2011 for Australian cyclone and high-wind areas, and DIN EN 1991-1 for European snow-load design, suitable for most Australian climate zones.
        • Multi-panel solar arrays — large residential and commercial solar installations spanning multiple roof bays use the Rapid Pro L across all mounting points for consistency and simplified spares logistics.
        • ProLine and Standard rail systems — if your solar installer uses Schletter's ProLine or Standard rail profile, the 119026-122 is the compatible flush-mount fastener without requiring rail-specific variants.

        The Rapid Pro L (119026-122) is not rated for flat concrete roofs, sloped concrete decks, or applications where the fastener would be submerged or in standing water. Do not install on fully horizontal roofs or in situations requiring design-specific load analysis beyond the standard AS/NZS 1170.2-2011 scope.

        (119026-122)

        The Rapid Pro L (119026-122) is rated for non-concealed pitched roofs with trapezoidal and corrugated metal profiles fixing into timber or metal structural purlins. It is not suitable for flat concrete roofs or concrete decks.

        Yes. The Rapid Pro L comes with a pre-assembled multi-adapter that works on both ProLine and Standard rail profiles, so you can stock one fastener SKU across different solar platform configurations.

        The rail seat on the Rapid Pro L can be adjusted vertically to set the panel clearance to the roof sheet based on the specific trapezoidal or corrugated profile depth. This eliminates the need for spacers or shimming during installation.

        Installation requires a TORX T40 hex key and an M14 socket only. No specialised fastening tools or torque limiters are needed; standard electrical and solar installer kits cover the requirement.

        Yes. The Rapid Pro L arrives pre-assembled with the clamping part, M8x35 stainless steel bolt, rubber compression spring, and UV-resistant EPDM rubber underlay (30x3x55mm) already fitted, so you can install it straight to the roof.

        The 119026-122 comes with a 25-year warranty covering material and workmanship defects, aligning with modern solar panel warranties and reducing long-term maintenance costs.

        The Schletter 119026-122 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 25 Year
        Commercial Use: 25 Year
        Warranty Method: Return To Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Schletter
        SKU 119026-122
        Model # 119026-122
        Package Weight 0.103kg
        TYPE VALUE
        Type Roof Clamp
        Brand Schletter
        Range Rapid Pro
        Mounting Flush trapezoidal and corrugated roof sheet
        Compatibility ProLine and Standard rails

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products