Search Results:
Search Results:
Search Results:
Search Results:
Learn more by watching our Cabac HNS030RF-750 | 750Hz Ripple Signal Filter video.
The Cabac HNS030RF-750 is a tuned passive inline ripple signal filter rated 250W, built to strip the 750Hz off-peak control signal out of the mains supply. The HNS030RF-750 works with LED, halogen, CFL, and incandescent lamps, and complies with AS/NZS 3100. It carries an IP20 ingress rating and runs on a 230V to 240V AC 50Hz supply.
Electricity distributors across parts of New South Wales inject a 750Hz off-peak ripple control signal onto the mains to switch hot water systems and street lighting remotely. That superimposed signal can make LED downlights flicker and fans buzz whenever it runs. The HNS030RF-750 sits inline on the supply and filters the 750Hz signal out, so sensitive lighting and dimmer circuits run clean.
Electricians reach for this filter when a customer reports flickering lights that track the off-peak switching cycle. It is designed to fit through a downlight hole, so it goes in inline without a separate enclosure. One filter can carry multiple dimmers on the same run as long as total load stays under 250W, and it is guaranteed flicker free with S-Click dimmers.
The HNS030RF-750 is tuned only to 750Hz, so it will not filter a 1050Hz signal used in Southern Queensland or a 492Hz signal used around St George and parts of Muswellbrook. It is IP20 rated for dry indoor use, not weatherproof, and must sit on circuits with up to 10A protection.
(HNS030RF-750)
The HNS030RF-750 is tuned to a 750Hz off-peak ripple control signal, used in NSW areas such as the Sydney main load area, Maitland, Bankstown, and Sutherland. Confirm your local ripple frequency with your electricity distributor before ordering, as some areas use 1050Hz or 492Hz.
Installation must be carried out by a licensed electrical contractor, as the filter forms part of a fixed-wire installation. It wires inline on the mains supply and is designed to fit through a downlight hole. Only install it on a circuit protected by up to a 10A breaker.
The filter works with LED, halogen, CFL, and incandescent lamps. It removes the flicker that LED downlights show during ripple signal events, along with the buzzing that can affect fans wired to the same supply.
One filter can serve multiple dimmers on the same run, provided the total connected load stays at or below 250W. Output is guaranteed flicker free when the filter is paired with S-Click dimmers.
The HNS030RF-750 complies with AS/NZS 3100 and carries an IP20 ingress rating for dry indoor installation. The filter runs on a 230V to 240V AC 50Hz supply and operates within a -10 to +50 degree C temperature range.
The ripple signal filter carries a 12-month manufacturer warranty from the invoice date, covering material and manufacturing defects. The warranty requires installation by a licensed electrical contractor and operation within the rated voltage, load, and temperature limits.
The filter is tuned only to 750Hz, so it will not correct a 1050Hz signal used in Southern Queensland or a 492Hz signal used around St George. Its IP20 rating limits it to dry indoor locations, away from damp or outdoor exposure.
The Cabac HNS030RF-750 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.
100-Day Fuss-Free Returns
We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.
If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.
All products come with a manufacturer’s or supplier’s warranty
Damaged or Faulty Goods
If your order arrives damaged or is faulty, let us know within 24 hours.
Contact us via our chat to arrange the return.
Exclusions
We can’t accept returns for:
How to Request a Return
Warranty starts from Invoice Date
Domestic Use: 1 Year
Commercial Use: 1 Year
Warranty Method: Clipsal in home warranty
These specifications and characteristics outline physical, mechanical, electrical details.
| Brand | CABAC |
| SKU | HNS030RF-750 |
| Barcode # | 9318674223856 |
| Package Weight | 0.622kg |
| TYPE | VALUE |
|---|---|
| Type | Ripple Signal Filter |
| Brand | Cabac |
| Colour | White |
| Wattage (W) | 250W |
| IP Rating | IP20 |
| Frequency (Hz) | 750Hz |
| AC Voltage | 230V - 240V |
| Temperature | -10°C - 50°C |
| Standard | AS/NZS 3100 |
Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.
Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.
Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.
Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.
For website terms and conditions https://www.sparkydirect.com.au/terms-of-use
Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.