Clipsal by Schneider Electric | Heat Fan Light Combo 1250W 4x275W + 8W LED | Ceiling-Mount White
The Clipsal AIRFLOW 6500ADSWE is a 4-in-1 ceiling-mounted combo rated 240V, 1250W, combining an exhaust fan, 8W LED light, and four 275W heat lamps for residential bathroom use. Airflow is 338m³/h (290m³/hr with backdraught shutter) and requires a minimum 500mm ceiling cavity. The 6500ADSWE is supplied with a dual-function C2000 switch for independent control of heat, light, and fan operations.
Bathrooms typically require three separate fixtures: a ceiling exhaust fan to handle steam and humidity, a light for visibility, and a heater for winter warmth. **The extraction challenge is particularly acute in bathrooms with spacious or high ceiling heights**, where conventional standalone units may struggle to perform. The Clipsal AIRFLOW 6500ADSWE **consolidates all three functions into one installation**, reducing ducting runs and ceiling penetrations while maintaining full capability. Renovators and new-build specifications increasingly call for combo units to achieve this simplification without compromise.
Electricians value the 6500ADSWE for its straightforward three-in-one design: a single ceiling installation replaces the wiring, ducting, and labour time of three separate fixtures. **The fan performs reliably in moisture-heavy bathrooms**, while the **four heat lamps deliver effective warmth even in rooms with generous ceiling heights**. This capability is specifically requested by many trade customers. The supplied dual-function C2000 switch simplifies householder control, and the **ball-bearing motor runs with minimal noise**, reducing call-backs from noise concerns. Margins are strong on combo units, and the 5-year manufacturer warranty reflects solid build quality.
Features
- Axial fan with backdraught shutter — 338m³/h airflow (290m³/h with shutter) keeps pace with steam and humidity generated in high-use bathrooms, drawing damp air efficiently through ducting.
- Four 275W halogen heat lamps — deliver effective warmth even in bathrooms with high ceiling heights, providing both rapid heat-up for winter mornings and high-intensity illumination when running independently.
- 8W LED centre globe — low-energy lighting option reducing electricity draw during general bathroom use compared to traditional incandescent bulbs.
- Dual-function C2000 switch (supplied) — independent control of Heat, Heat+Light, Light, and Fan modes with no additional switching required on the wall.
- Double-insulated ball-bearing motor — operates quietly at just 46dBA measured at 3 metres, ideal for bathrooms adjacent to bedrooms or living areas where noise control matters.
- 500mm minimum ceiling cavity required — fits standard residential flat and raked ceilings with straightforward ceiling box installation.
- 240V, 50Hz rated — operates on standard Australian residential mains supply without step-down transformers.
- 1250W total power draw — requires 10A circuit protection, typical for residential bathroom sub-circuits under AS/NZS 3000.
- Ductable ceiling-vent design — connects to external ducting for direct exhaust; not weatherproof and unsuitable for unducted mounting or outdoor use.
- 5-year domestic warranty — in-home warranty coverage from Clipsal; replacement or repair at no cost for manufacturing defects within the warranty period.
Where to use
- Bathroom renovation and new builds — replaces three separate fixtures with one installation, reducing ceiling penetrations and wiring complexity.
- Master ensuite and secondary bathrooms — high-use areas benefit from dedicated heat, light, and extraction combined in a single unit.
- Cold climate homes — winter mornings in southern Australia and elevated regions require rapid heat; four 275W lamps deliver warm-up without waiting for fan circulation.
- Rental properties and holiday homes — straightforward three-in-one operation reduces tenant confusion and maintenance call-outs from confusion over separate switches.
- Small-to-medium bathrooms — 338m³/h airflow suits rooms up to approximately 8–10 square metres; adequate for typical residential ensuite ventilation.
- Retrofit bathroom upgrades — existing ducted exhaust fan paths can be repurposed; no new ductwork design required in many cases.
The Clipsal AIRFLOW 6500ADSWE is not suitable for unducted ceiling-vent-only mounting, outdoor or semi-exposed locations, or wet areas such as shower recesses. Do not install in high-moisture or splash-zone areas without a vapour barrier enclosure or weatherproof rating.
Verified Sparky Direct customer reviews: Clipsal AIRFLOW 6500ADSWE (6500ADS-WE)
"Heat lamps throw out good amount of heat, even with high ceilings." — AC
"Great price, quick delivery time and quality products." — Jmed
"Quiet operation, looks neat." — Geoff
Not what you are looking for? Check these Airflow Exhaust Fans
