Skip to main content
Get $15 Prezzee on $150 MAX9 or Clipsal Lighting | FREE Clipsal Shipping $330+ View

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our GT Smoke Alarms GT10 | Stand Alone 10-Year Sealed Lithium Smoke Alarm video.

        GT Smoke Alarms | Standalone Photoelectric Smoke Alarm 85 dB(A) | AS 3786:2014 Certified

        The GT Smoke Alarms GT10 is a standalone photoelectric smoke alarm powered by a sealed 10-year lithium battery. It carries certification to AS 3786:2014 and to EN 14604:2005+AC:2008. The GT10 uses a split-spectrum smoke chamber to separate smoke from vapour or dust, and sounds at 85 dB(A) measured at 3 metres. A single large push button handles test and silence, and an infrared sensor lets any existing remote control in the home mute the alarm.

        A traditional smoke chamber cannot separate combustion particles from cooking vapour or airborne dust, which is what sets off a nuisance alarm. The GT10 uses a split-spectrum chamber to distinguish smoke from vapour or dust before it sounds. When an alarm does trigger, an infrared sensor lets any existing remote control in the home mute it. The sounder then stays quiet for a 9-minute silence period while detection continues.

        The GT10 suits a space that stands on its own: one enclosed sleeping area, no alarm circuit run to it, and nothing to interconnect to. It runs on a sealed 3V lithium battery rated for the full 10-year life of the alarm, so there is no annual battery change. A monitoring current of 15 uA or less is what supports that figure. Because the cell is sealed and not replaceable, the alarm is replaced as a unit at end of life.

        Features

        • Split-spectrum chamber — distinguishes smoke from water vapour or dust before sounding, which reduces the nuisance alarms a traditional single chamber produces.
        • Photoelectric sensing — the GT10 detects smoke by scattered light in a photocell chamber, with no ionisation sensor fitted.
        • 85 dB(A) sound output — the sounder is rated at 85 dB(A) measured 3 metres from the alarm.
        • Infrared remote silence — the GT10 carries an infrared sensor, so any existing infrared remote control in the home mutes an unwanted alarm.
        • 9-minute silence period — the sounder stays muted for 9 minutes after silencing, and the alarm remains active throughout.
        • 12-minute re-trigger window — if smoke density rises within 12 minutes of silencing, the alarm sounds again rather than staying muted.
        • Single test button — one large central push button covers both test and silence, needing no tool and no button sequence.
        • Sealed 10-year battery — a non-replaceable 3V CR123A lithium cell is sealed in for the whole product lifecycle.
        • Fault and low-battery warning — the alarm signals a fault condition and a low battery as well as sounding on smoke.
        • AS 3786:2014 certified — the GT10 is certified to AS 3786:2014 and to EN 14604:2005+AC:2008.
        • 20 to 40 square metres — one GT10 protects 20 to 40 square metres where the ceiling height is under 8 metres.
        • Standalone only — the GT10 does not interconnect with other alarms, so it does not sound other units when it detects smoke.

        Where to use

        • Caravans and motorhomes — the GT10 meets the ceiling-mount, photoelectric, AS 3786:2014, silencing and sealed 10-year battery requirements set for registered caravans.
        • Rigid-sided annexes — an annexe used for sleeping takes its own alarm alongside the one inside the van.
        • Boat and vessel cabins — an enclosed cabin sits outside any interconnection requirement, so a single alarm covers it.
        • Independent single-room dwellings — a structure with one enclosed sleeping space needs one alarm and has no second unit to pair with.
        • Positions with no mains circuit — the GT10 needs no mains connection, so it fits spaces with no alarm circuit run to them.
        • Rooms up to 40 square metres — one GT10 covers 20 to 40 square metres where the ceiling sits under 8 metres.
        • End-of-life alarm swaps — replaces a battery smoke alarm that has passed its 10-year service life.
        • Residential indoor rooms — intended residential positions include bedrooms, living rooms, hallways, reading rooms, apartments and dormitories.

        The GT10 is a standalone alarm that does not interconnect, so it cannot meet an interconnection requirement alone. It is rated for indoor use only, from -10 to +55 degrees Celsius, at 95 per cent RH or below. Coverage figures assume a ceiling height under 8 metres.

        (GT10)

        The GT10 is certified to AS 3786:2014, the Australian Standard for smoke alarms, and to EN 14604:2005+AC:2008. It is a photoelectric alarm with no ionisation sensor fitted. Certification covers the alarm itself, not its placement, which is set by the legislation applying to the dwelling.

        No mains connection is involved. The alarm runs on a sealed lithium battery and fixes to the ceiling surface, so a homeowner can fit it. Placement rules vary by state and by dwelling type, so confirm the required alarm positions for the dwelling before fitting.

        No. The GT10 is photoelectric and AS 3786:2014 certified, but it does not interconnect. Queensland requires interconnected photoelectric alarms in dwellings that are sold or leased, in caravans and motorhomes registered or transferred since 1 July 2024, and in all remaining dwellings, caravans and motorhomes from 1 January 2027.

        A traditional smoke chamber cannot separate combustion particles from water vapour or airborne dust, which is what sets off a nuisance alarm. The split-spectrum chamber distinguishes smoke from vapour or dust before the sounder activates, which cuts false alarms while detection stays responsive.

        One GT10 protects 20 to 40 square metres where the ceiling height is under 8 metres. Above 8 metres the stated coverage does not apply. Coverage is a capability figure, not a placement rule: the number and position of alarms required in a dwelling is set by legislation.

        The alarm carries an infrared sensor, so any existing infrared remote control in the home mutes it, with no pairing needed. Silencing mutes the sounder for 9 minutes and does not disable detection. If smoke density rises within 12 minutes of silencing, the alarm sounds again.

        The sealed 3V lithium battery is rated for 10 years and is not replaceable, so there is no annual battery change. Smoke alarms are generally replaced 10 years from the date of manufacture. The GT10 is replaced as a complete unit at end of life rather than re-batteried.

        A 10-year warranty applies to both domestic and commercial use and runs from the invoice date. To make a claim, return the item to Sparky Direct. The warranty covers manufacturing defects, and you must provide proof of purchase for any claim.

        The GT Smoke Alarms GT10 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 10 Years
        Commercial Use: 10 Years
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand GT Smoke Alarms
        SKU GT10
        Model # GT10
        Barcode # 9309001770006
        Package Weight 0.400kg
        TYPE VALUE
        Type Smoke Alarm
        Brand GT Smoke Alarms
        Colour White
        Power Source Sealed 10-year lithium battery
        Battery Life 10 Years
        Mounting Type Surface Mount

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products