Utilux | 1.4m Earth Stake 12mm Copper Bonded + Brass Clamp | Complete with Warning Tag
The Utilux ER1314WC10-1 is a 1.4-metre copper-bonded earth rod rated for Australian residential and commercial earthing installations. The rod comes supplied with a 12mm brass clamp and a warning tag, covering the complete earthing kit needed for standard domestic electrical work and meets Australian Standards requirements.
Most domestic homes and renovation projects require a single 1.4-metre earth stake driven vertically into the ground near the meter box to establish an earth reference for the entire installation. The copper-bonded construction combines mechanical strength with corrosion resistance, allowing the rod to survive in harsh soils without degrading. The supplied brass clamp terminates the main earth conductor cable to the top of the rod, forming the critical connection between the switchboard earth bar and the soil.
Electricians value the Utilux kit for its solid construction and affordable pricing on standard domestic jobs. The rod drives straight without bending through firm soils, and the clamp holds reliably for decades under typical installation conditions. Stocking a few of these single-buy units alongside 10-packs covers the mix of small repairs, rental turnover, and new-build work that trades typically encounter.
Features
- Copper-bonded construction — steel core provides mechanical strength to drive through hard or stony ground without bending; copper layer bonds to the outer surface for excellent conductivity and long-term corrosion resistance.
- 1.4-metre length — the standard depth for residential and light commercial earthing across Australia, reaching below seasonal moisture variation and into stable soil.
- 12mm diameter rod — suits typical domestic earth conductors (4mm² to 16mm²) connected via the included brass clamp, standard cable size for most residential circuits.
- 12mm brass clamp supplied — pre-sized to terminate earth cable from 4mm² to 16mm² directly to the top of the rod without modification or additional fasteners.
- Warning tag included — colour may vary (gold or white); tag marks the location of the buried rod so future trades avoid striking it during maintenance or upgrades.
- Single-buy supply — one complete unit per order, ideal for replacement jobs, rental property maintenance, and installation trials; 10-packs available for larger projects.
- Australian Standards compliant — complies with the earthing requirements of AS/NZS 3000 and AS/NZS 3017 for mains earthing installations in residential and commercial buildings.
- Fast installation — rod drives into soft to firm soils in minutes using a standard hand-sledge; achieves proper depth and contact without specialist equipment.
- Proven trade choice — Utilux earth stakes are stocked by residential electricians across Australia and are a standard specification for new domestic builds and rental property upgrades.
- Cost-effective — trades benefit from solid trade-grade construction at a price point that supports margins on repair and maintenance jobs without bulk purchasing.
- Lifetime durability — copper-bonded rods in residential soils typically outlast the building itself when correctly installed; replacement need is rare within the first 30 years.
- No additional parts required — clamp and tag are supplied; only a hand-sledge and a simple augur or auger tool are needed to drive the rod into firm soil.
Where to use
- New residential builds — the Utilux ER1314WC10-1 is specified on the majority of domestic new builds across Australia, providing a reliable earthing foundation for the entire electrical installation.
- Renovation and extension work — when a building is rewired or extended, existing earth rods may need replacement if corroded; the Utilux kit covers this standard requirement on kitchen and bathroom upgrades.
- Rental property turnover — properties changing hands or being upgraded for rental require compliance verification; the ER1314WC10-1 satisfies standard earthing requirements without cost overrun.
- Remote installations — rural homes and farm buildings often lack the mains infrastructure of urban sites; single earth rods are a practical solution where bonded earth to adjacent metalwork is unavailable.
- Switchboard upgrades — when the main switch or switchboard is replaced, the earthing system is tested; the Utilux rod is a low-cost way to upgrade or replace a worn rod on the same site.
- Swimming pool installations — pools and wet areas require dedicated earthing; a single Utilux rod correctly installed provides the earth reference needed for pool equipment bonding.
- Caravan and mobile home sites — single-unit sites without mains supply to the grid require portable or temporary earthing; the ER1314WC10-1 is suitable for short-term supply and fault protection.
The Utilux ER1314WC10-1 is not suitable for highly corrosive or waterlogged soils, where stainless steel rods or specialist designs offer better durability. Do not use this product in chemical processing plants, coastal sites with direct salt-spray exposure, or installations where the soil resistivity is known to exceed 500 ohm-metres without first verifying adequacy with site testing. The single rod is not appropriate for large industrial installations, multi-building campuses, or applications where multiple rods and arrays are required to meet fault-current demands.
Verified Sparky Direct customer reviews: Utilux ER1314WC10-1 (ER1314WC10-1)
"Everything was good quality and arrived in a timely manner." — Shane
"Good solid earthing stake at a great price." — Colin
"High quality product that was delivered promptly." — Bob C
