Clipsal by Schneider Electric | Pro Series Vertical Single Power Point Cover 15A | Black Skin Only
The Clipsal P3015V15C-BK is the cover frame for a Pro Series vertical single 15A switched socket outlet, finished in gloss black. The P3015V15C-BK is the skin only: it clips onto an installed Pro Series assembly and carries the apertures for one rocker and one 15A socket. Schneider Electric moulds the skin in ABS with a polycarbonate window, measuring 116mm high, 78mm wide and 9mm deep. The cover is listed to AS/NZ 3112 with an IK08 impact rating.
Commercial power points absorb trolley knocks, cleaning equipment and years of plugs going in and out, and the visible skin registers the damage first. Replacing an entire outlet over a scuffed or cracked face means isolating the circuit and extracting the mechanism from the wall. The P3015V15C-BK is the skin only, so a marked cover lifts off and a replacement clips on with the mechanism left wired in position. The IK08 impact rating is the specification the replacement itself is built to.
Pro Series was designed as hard-wearing switchgear for commercial buildings. The skin carries the part of that design a client actually looks at: a gloss black finish, bevelled edges that deflect impacts, and large integrated windows for permanent circuit identification. Carrying the P3015V15C-BK as a maintenance line turns a facilities call-out into a cover swap rather than a full outlet replacement. Schneider Electric lists clip-on fixing, so the change takes minutes with no screws to chase. The skin is secured in place on the plate rather than left to work loose over time.
Features
- Skin cover only — the P3015V15C-BK supplies the cover frame alone, with no mechanism, no grid plate and no socket included.
- Clip-on fixing — Schneider Electric lists clip-on as the fixing mode, so the cover seats onto the assembly without screws.
- One rocker, one socket — the P3015V15C-BK is cut for a single rocker switch and a single power socket outlet.
- 15A destination — the datasheet lists a rated current of 15A, so the aperture suits a 15A switched socket rather than a 10A one.
- Vertical installation direction — Schneider Electric lists vertical as the installation direction for the P3015V15C-BK.
- IK08 impact rating — the listing records IK08 protection, which covers the mechanical knocks a commercial wall plate takes.
- Gloss black finish — the datasheet lists a glossy surface finish in the Black (BK) colour tint.
- ABS skin, polycarbonate window — ABS forms the skin and polycarbonate forms the circuit identification window.
- Circuit identification windows — Pro Series carries large integrated windows so circuit labelling stays legible and permanent.
- Bevelled edge design — Pro Series uses bevelled edges that deflect impacts on trafficked commercial walls.
- 116 x 78 x 9mm — 116mm high, 78mm wide and 9mm deep, at a net weight of 0.018kg.
- 0 to 45 deg C ambient rating — rated for operation from 0 to 45 deg C at 10 to 95 percent relative humidity.
Where to use
- Commercial 15A outlet positions — the P3015V15C-BK covers a vertical single 15A switched socket in a Pro Series assembly.
- Facilities maintenance stock — a damaged cover is swapped without isolating the circuit or disturbing the wired mechanism.
- Plant rooms and back-of-house — Pro Series is built for the working side of a building rather than display areas.
- Commercial kitchens and prep areas — 15A outlets feed the heavier appliances, and the P3015V15C-BK keeps the face presentable.
- Workshops and service bays — the IK08 rating suits walls where tooling and trolleys make contact with the plate.
- Black-scheme fit-outs — the gloss black skin matches dark wall finishes in hospitality and retail interiors.
- Circuit-labelled installations — the integrated windows keep the circuit reference on the plate where it stays readable.
- Refurbishment of Pro Series outlets — the P3015V15C-BK refreshes a tired face without changing the outlet behind it.
The P3015V15C-BK is a cover frame only: no mechanism, no grid plate and no socket are supplied, and the cover switches nothing on its own. Schneider Electric lists vertical installation for this SKU at a 15A rated current, so it does not suit a horizontal outlet or a 10A aperture. The ambient rating is 0 to 45 deg C at 10 to 95 percent humidity, which puts it indoors rather than outside.
