Mitsubishi Electric | Wall-Mounted Split System Air Conditioner 6.0kW Cooling AP Series | R32 Built-In Wi-Fi
The Mitsubishi Electric MSZ-AP60VGKD2KIT is a reverse-cycle wall-mounted split system rated 6.0 kW cooling and 6.8 kW heating. The kit pairs the MSZ-AP60VGKD2 indoor unit with the MUZ-AP60VGD2 outdoor unit on R32 refrigerant. The MSZ-AP60VGKD2KIT's indoor unit includes built-in Wi-Fi, so no separate adapter is needed.
At 6.0 kW cooling and 6.8 kW heating, the MSZ-AP60VGKD2KIT suits a large open-plan living area. Output modulates between 1.4 and 7.3 kW cooling and 2.0 to 8.6 kW heating. The zoned energy label gives it 4.5 stars for cooling in the hot and cold zones and 4 stars in the average zone. Heating is rated 3 stars in the hot zone and 2.5 in the average and cold zones. Airflow runs to 315 L/s in cooling and 338 L/s in heating across five fan speeds.
Pipework is 6.35 mm for liquid and 12.70 mm for gas, with a 30 m maximum run and 15 m height difference. The outdoor unit is pre-charged with 1.05 kg of R32, covers pipe runs up to 15 m, and has a maximum running current of 14 A. Installation must be carried out by an appropriately licensed technician.
Carton sizes and weights
- Indoor unit carton — 340 x 1160 x 400 mm (H x W x D), 18.1 kg gross, 16 kg bare.
- Outdoor unit carton — 890 x 940 x 380 mm (H x W x D), 48.1 kg gross, 41 kg bare.
Combined gross weight is 66.2 kg. The indoor carton is the longer of the two at 1160 mm, so measure the load space before collecting. At 48.1 kg, the outdoor carton is a two-person lift. Check the vehicle or trailer can take both cartons before collecting. Transport and store the outdoor unit upright, as laying it on its side or top risks equipment damage. Until installation, keep the system in a clean, dry, pest-free place to meet the warranty conditions.
Features
- Built-in Wi-Fi control — the MSZ-AP60VGKD2KIT connects to the mobile app through the indoor unit, with no separate adapter required.
- Indoor sound range — sound pressure at the indoor unit runs from 29 dB(A) up to 48 dB(A) at top fan speed.
- Five indoor fan speeds — airflow runs from 157 to 315 L/s in cooling and 180 to 338 L/s in heating.
- R32 refrigerant — the system runs on R32, with 1.05 kg charged into the outdoor unit at the factory.
- Heating star rating — the zoned energy label rates heating at 3 stars hot, and 2.5 stars in the average and cold zones.
- Rated power draw — input at rated capacity is 1.59 kW in cooling and 1.65 kW in heating.
- Dual Barrier Coating — the indoor unit has a coating that resists dust and dirt buildup inside the air path.
- Outdoor sound pressure — the outdoor unit measures 56 dB(A) in cooling and 57 dB(A) in heating.
- Wide indoor head — the indoor unit measures 325 x 1100 x 257 mm (H x W x D) and weighs 16 kg.
- Outdoor temperature limits — cooling runs from -10 to 46 deg C, and heating from -15 to 24 deg C (outdoor air).
- Licensed installation only — an appropriately licensed technician must install and commission the MSZ-AP60VGKD2KIT.
- 5-year parts and labour warranty — residential installations are covered for five years for parts and labour by Mitsubishi Electric.
Where to use
- Open-plan living areas — 6.0 kW of cooling covers a combined lounge, kitchen and dining space.
- Large master bedrooms — the MSZ-AP60VGKD2KIT can heat a large room with 6.8 kW of heating through winter.
- Long pipe runs — 30 m of pipe and 15 m of height let the outdoor unit sit well away from the indoor head.
- Granny flats and extensions — the MSZ-AP60VGKD2KIT covers a separate dwelling from a single indoor head.
- Rooms needing app control — built-in Wi-Fi lets you switch the system on before the room is occupied.
The MSZ-AP60VGKD2KIT is not sized for whole-of-home duty at 6.0 kW cooling, and the indoor unit does not drop below 29 dB(A). Heating holds 2.5 stars in the average and cold zones, so check the zone before specifying it for winter duty. Outdoor operation is limited to -10 to 46 deg C in cooling and -15 to 24 deg C in heating. Pipe runs beyond 30 m fall outside the published installation limits.
Confirm the final selection against the room, its orientation, and its insulation before ordering. Sparky Direct does not provide installation advice or assess suitability for a specific site. The warranty runs from the invoice date and is void if the system is not installed by a licensed electrician.
