Search Results:
Search Results:
Search Results:
Search Results:
Find the best Clipsal Solis Accessories here at Sparky Direct. [ Read More ]
Clipsal Solis accessories include every supporting part used across the Solis and Solis T Series ecosystem. The range pulls together switches, power points, dimmers, USB-C outlets, smart modules, grid plates, cover plates, adaptors, shrouds, wall boxes, mounting brackets and communication plates. Solis is not just a switch face style. It is a premium accessory system built around coordinated finishes, slim profiles, Clipsal 40 series mechanism compatibility and Wiser smart home integration. Treat the accessory range as a kit of parts that, when ordered together, produces a consistent wall language across switches, sockets, charging points, smart devices and data outlets. The broader Clipsal Solis Light Switches category sits alongside this accessory set on most premium projects.
The Solis collection runs in two families. The Clipsal Solis Series Light Switches deliver flush push-button operation in Matte White and Matte Black. The Clipsal Solis T-Series Light Switches deliver toggle operation in Platinum Aluminium, Ebony Aluminium, Living Brass and White Ceramic. Both series share the grid architecture, the compatible mechanism formats and the Wiser smart home capability behind the cover. The visible covers and actuation styles differ, which is why series choice should be locked in at the design stage. Ordering accessories without first confirming the series leads to mismatched parts on site.
The target audience covers electricians, builders, designers, architects and homeowners working on premium residential projects. Typical applications include new builds, luxury renovations, prestige apartments, boutique commercial spaces and design-led fitouts. Electricians benefit from pre-mounted screws, in-line terminals, large terminal capacity and the familiar 40M mechanism compatibility shared with the wider Clipsal Iconic Switches and Dimmers range. Designers and architects benefit from finish consistency across switches, sockets and data outlets. Homeowners benefit from a switch system that reads as part of the interior rather than disappearing into the cheapest line item on the bill of materials.
Switch accessories cover 1-gang, 2-gang, 3-gang and 4-gang formats. UA grid plate and cover assemblies are used where mechanisms are specified separately from the visible plate. The 40M mechanism compatibility allows standard switching, dimming, smart switching and specialised mechanisms to be configured behind a single Solis face. Gang count and cover type should both be selected before placing an order, since changing either after fit-off usually means a return and a re-order. The Clipsal Solis Switch Grid and Plate category lists the grid and plate parts as their own line items.
Power point accessories include single switched sockets, double sockets, double sockets with USB-C and double sockets with extra switch space. Horizontal-only mounting applies to some products, which is worth noting at the rough-in stage so the wall box is oriented correctly. Matching covers, mechanisms, shutter protection, 10A / 230-240V rating, 84 mm mounting centres on relevant socket products, terminal capacity and 16 mm strip length all sit inside the published specifications. The licensed electrician should run through these against the project schedule. The wider Clipsal Power Points range can fill gaps where a Solis variant is not configured for the role.
Dimmer accessories cover compatible dimmer mechanisms and adaptor requirements. The available options include connected rotary dimming, push-button dimmer compatibility and Wiser dimming. Dimming performance depends on the lighting load, the driver, the lamp type and the chosen mechanism, so a one-size-fits-all approach rarely works for LED circuits. Electricians should verify LED load compatibility against the lamp schedule before ordering. The full Clipsal Iconic Dimmers and Timers range supplies the underlying mechanisms.
Smart accessories cover Wiser-compatible switches, dimmers and smart sockets. Wiser products use Zigbee 3.0 and a Wiser Home Hub for whole-home control, scheduling, scenes, energy monitoring and voice assistant compatibility. Bluetooth supports limited device-level control without a hub, but Zigbee with the hub is the preferred path for whole-home automation. Buyers should confirm at the brief stage whether the project needs smart switching, smart power or both, since the Wiser Hub is part of the bill of materials in either case. The Clipsal Iconic Wiser range and the Smart Power Points category list the hub and connected devices.
Mounting accessories include 157PRM4 wall boxes, 155PRMU4 plaster brackets, 155U4 metal stud or frame brackets, 154C4 C-clip brackets and 90BD3-BK and 90BD4-BK shrouds. Mounting accessories matter more on Solis than on standard switch ranges because the ultra-slim cover profile makes wall alignment and set depth highly visible. A bracket that sits 2 mm out will read as a clear defect on a Solis plate. Selection depends on wall type, gang count, mounting centres and the specific Solis product being installed.
Communication plate covers carry data, AV and low-voltage connections in the Solis aesthetic. The 1043CP communication plate cover suits media rooms, home offices, study nooks, premium apartments and integrated smart homes. Planning data, power, lighting and USB-C positions together at the design stage delivers a consistent wall finish at fit-off, rather than a scattered mix of plate styles. The Clipsal Iconic Network Connectivity category supplies the data mechanisms that sit behind the Solis communication cover.
Solis accessories combine four pieces: a grid or mounting structure, a compatible 40 series mechanism, an adaptor where required and a slim cover plate. The grid carries the mechanism. The mechanism handles the electrical function. The adaptor matches non-standard mechanisms to the grid. The cover provides the finish. Modularity is the reason the same Solis face can present a switch, a dimmer, a smart connected device or a power point. Electricians can build custom switch, dimmer, smart and outlet combinations across a project while keeping the visible finish consistent. The Clipsal Iconic Mechanisms range supplies the mechanism layer behind the Solis cover.
The push-button Solis Series gives a minimalist flush interaction, with the face sitting clean and unbroken across the gangs. The Solis T Series toggle gives a more tactile, material-led switching experience, with the toggle as a visible design element. The choice between the two is normally aesthetic and functional rather than electrical, since both ranges run the same 40 series mechanism platform. Stick to one style within a single room unless the design brief deliberately calls for a mix.
Wiser-connected Solis accessories use Zigbee for scalable smart home control through the Wiser Home Hub. The hub talks to the Wiser app, which handles remote control, scheduling, scene creation, energy monitoring and commissioning. The connected sockets and smart mechanisms cannot reach the app without the hub. Bluetooth provides some device-level control, but whole-home automation is the Zigbee plus hub path. Confirm hub inclusion in the bill of materials early, since adding it after fit-off is a separate purchase and a separate commissioning visit.
Specify Solis accessories early during electrical planning. Lock in the finish schedule, gang counts, smart home requirements, dimmer compatibility and mounting accessories before rough-in. Confirming the smart device list at the planning stage avoids the most common cause of fit-off delays on premium homes, which is a missing Wiser Hub when the connected sockets arrive on site. The schedule should list grid, cover, mechanism, adaptor and bracket as separate line items so nothing falls between purchase orders.
Solis suits renovations where the new switchgear is intended to lift the overall interior finish. Existing wiring, wall boxes and mechanism compatibility should all be assessed by a licensed electrician before the order is placed. Older wall boxes may need replacement or shroud accessories to bring them up to the Solis fit-off standard. Mixing existing plates with new Solis plates in the same room is best avoided unless the older plates are out of sight.
High-visibility positions deserve the strongest accessory selection. Kitchens and living areas tend to combine multi-gang switches, dimmers, double sockets, USB-C outlets and communication plates within a few wall positions. Finish-matched accessories across all of these positions are what makes a Solis install read as deliberate. Run a quick walk-through of each high-visibility wall during planning so the accessory list reflects what will actually be visible at handover.
Smart homes, home offices and media rooms benefit from coordinated planning of power, data, charging and lighting. Wiser smart sockets, connected dimmers, communication plates, data outlets and AV integration sit naturally together on a Solis-finished wall. The Smart Solutions section sets out the wider smart hardware landscape if the project calls for more than switching and outlets.
Pick Solis Series for Matte White or Matte Black push-button designs. Pick Solis T Series for toggle operation and premium material finishes. Series and finish should be locked in before ordering mechanisms, covers and accessories, since the accessory list flows from those two choices. Switching series mid-project is the most expensive mistake on a Solis schedule.
Gang count, from 1-gang to 4-gang, should match the number of controlled circuits, switches, dimmers and extra functions at each wall position. Walk the electrical plan room by room and write the gang count next to each location before ordering. Electricians should confirm the schedule before procurement to avoid under-ordering or over-ordering, both of which add cost.
Mounting centres of 84 mm or 120 mm apply depending on the product. Wall construction drives the bracket choice: timber frame, plasterboard, masonry and thin-wall applications each have their own preferred bracket. Brackets, wall boxes, C-clips and shrouds should be treated as schedule-critical line items, not afterthoughts ordered later. A Solis plate sitting proud on the wall is almost always a bracket selection issue, not a product fault.
Wiser, Zigbee, hubs, dimmers, LED drivers and lamp loads should all be confirmed before ordering. Not every circuit needs smart control, and the smart capability should match the homeowner's practical use case rather than the salesperson's. Over-specifying smart features adds cost without value. Under-specifying them creates retrofit work later.
Solis accessories can involve separate line items per position: grid, cover, adaptor, mechanism, shroud, bracket and smart module. Check the complete product list against the schedule before checkout. Missing one line item, such as a grid plate for a smart socket, is the most common cause of an incomplete kit arriving on site.
Any installation, replacement or alteration involving electrical wiring, switches, sockets, dimmers or smart power devices must be carried out by a licensed electrician in Australia. Buyers, designers and builders can select and order products, but the electrical work itself is not a DIY task. This applies equally to a single switch swap and a full-house Solis fit-off.
Safety note: Solis accessories are not DIY products. All wiring, mechanism installation, dimmer conversion and smart device commissioning must be performed by a licensed electrician. Sparky Direct supplies the products. The licensed electrician performs the install.
Solis socket products carry RCM certification and comply with AS/NZS 3112 for socket outlets where relevant. Installation must follow AS/NZS 3000 Wiring Rules and the state or territory electrical safety laws that apply at the site. Keep this section at the awareness level. The licensed electrician is responsible for the detailed compliance work during the install.
Accurate bracket alignment, wall depth, shroud selection and cover retention all matter more on Solis than on a standard switch range, since the ultra-slim cover makes every misalignment visible. Coordinate rough-in and fit-off between the electrician and the builder so covers sit flush, finishes are correct across the room and no accessories are missing on the day. The Sparky Direct team is reachable through the contact-us page for product-level questions during planning.
Solis is the premium, design-led accessory system. Iconic is the broader, more accessible platform with wider colour and skin choice. Both support Wiser smart home functionality through the same 40 series mechanisms. Solis focuses on ultra-slim covers, premium materials and architectural finish consistency. Iconic gives more cover skin options at a lower price point. Many projects use Iconic in service rooms and Solis in high-visibility areas, since the shared mechanism platform makes the combination viable.
Compare premium ranges on finish choice, material feel, smart compatibility, slim profile, Australian availability and whole-home accessory coordination. Solis suits projects where premium aesthetics, smart-ready capability and a coordinated electrical finish are all required at the same time. The Clipsal Saturn Zen Light Switches range is the closest direct comparison and may suit buyers who prefer the Saturn visual language.
Generic slimline accessories may match the slim profile look from a distance, but the comparable points usually weaken on closer inspection. Material quality, mechanism compatibility, mounting precision, smart ecosystem integration and supply support all sit further from the Clipsal standard. For an electrician quoting a job that has to last, generic accessories also bring an unknown on warranty and replacement parts. Tone aside, this is the honest read.
Electricians and builders working on full-home fitouts should use a room-by-room schedule that lists every wall position. Cross-checking the schedule against the online order before checkout takes minutes and removes most of the day-of-fit-off issues.
Electricians, builders and contractors ordering for multiple rooms or multiple dwellings benefit from consistent finish selection across the whole job. Verify the product schedule, plan staged delivery to match the construction program and add spare components for breakage or change orders. Mixing finish suffixes within a single order is the most common cause of a wall reading inconsistent at handover, so flag this risk at the schedule sign-off stage.
Solis accessories carry a premium price point compared with everyday switch ranges. The value sits in finish quality, reduced visual compromise on the wall, smart readiness and whole-project consistency. The right way to evaluate the cost is per project, not per unit, since the saving on a cheaper switch range is invisible compared with the wall finish across a dozen rooms.
Related ranges that often appear on the same project include Clipsal Solis Power Points, USB Powerpoint outlets, the Clipsal Iconic Switch Grids and Surrounds set for related grid hardware, and the Clipsal Switch Mechanisms page for mechanism-level parts. The wider Clipsal brand page lists the full Clipsal range stocked on site.
Club Clipsal is Australia's largest electrician community offering trade rewards, business support, and exclusive benefits. When you nominate Sparky Direct as your preferred wholesaler, we automatically apply your Clipsal spend points to your Club Clipsal account daily.
Entry-level offering coaching, mentoring, and training discounts
Unlock exclusive industry tools and networking events
Access Toyota fleet offers and business software discounts
Maximum benefits, including VIP experiences and rewards
1. Sign Up: Create your Club Clipsal account at clipsal.com/club-clipsal or via the iCat mobile app
2. Nominate Sparky Direct: Select Sparky Direct from the wholesaler dropdown menu in your profile
3. Add Email: Enter your Sparky Direct account email address in the membership number field
4. Start Earning: Every dollar spent on Clipsal products earns points automatically
Redeem points from the rewards store, including gift cards, tools, and experiences. Access business summits, product training, and industry networking events. Receive early access to new product launches and special promotions. Connect with fellow electricians via the Club Clipsal community app.
Watch Clipsal Iconic 40APB-VW | Dolly Push Button Blank Vivid White | Single Buy video
Watch Clipsal Iconic 40R32-VW | Dolly Rocker Blank 32A | Vivid White | Single Buy video
Watch Clipsal Iconic 40MD20 | Double Pole Switch Mechanism 1-Way 20AX video
Using the Clipsal Solis range on a large house renovation. Started with the kitchen bench GPOs. The client had selected still new to market 'Carbonized Bamboo' as a primary finish. I felt that the standard white or black GPO would cheapen the kitchen. My client agreed and we made the purchase. She was so excited and impressed, insisted I use Clipsal Solis switches for all light and fan controllers. These are not cheap! But they are a real class act. But in the context of a large reno cost, well sometimes the Project just needs top shelf small details.
The iconic range is amazing, we purchase these black double power socket face plates for our media room as we painted it a similar dark colour. now instead of the white plug sticking out like a sore thumb the area is more disguised and just looks cleaner. Pulled the old face plate off with my hands and clicked the new ones on in its place. SIMPLE.
Pairing this Clipsal Universal Dimmer Switch with my 4 x Clipsal 7W LED Downlights for the Theatre Room was a smart move. The dimmer's precise control and seamless integration with the downlights create the perfect ambiance for movie nights, allowing for smooth brightness adjustments. A must have for any home theatre enthusiasts.
Quality products in stock • Fast Australia-wide delivery • Competitive trade pricing
Browse Clipsal Solis Accessories → Get Expert Advice →Yes, their smooth surfaces can be wiped clean with a soft, dry cloth.
You can find Clipsal Solis Accessories at Sparky Direct, offering genuine products and convenient Australia-wide delivery.
Yes, Australian regulations require a licensed electrician to install or replace electrical accessories.
Confirm compatibility with existing Solis products, required mechanisms, and installation requirements.
Yes, they are available through authorised electrical suppliers and online electrical retailers.
Yes, they are supplied with a manufacturer’s warranty covering defects under normal use.
Yes, they are built for reliability and longevity in Australian homes.
Yes, their clean and minimalist design suits contemporary home interiors.
Yes, the range includes neutral colour options to suit a variety of interior styles.
They are designed for everyday use and built to withstand regular handling.
Yes, they are commonly installed in kitchens, living rooms, bedrooms, and hallways.
Yes, they are designed to coordinate with the various Solis switch designs and finishes.
Yes, they are suitable for use across multiple rooms for a uniform finish.
Clipsal Solis accessories include matching electrical components designed to complement the Solis switch range, such as power points, cover plates, mechanisms, and related fittings.
Using matching accessories creates a consistent and cohesive look throughout the home.
The range includes power points, switch mechanisms, cover plates, and matching electrical accessories.
Yes, installation must be carried out by a licensed electrician to meet Australian safety regulations.
Yes, they are commonly used in renovation projects where compatible wiring and wall boxes are present.
They typically feature durable faceplates and quality internal components designed for long-term reliability.
Accessories such as dimmer mechanisms are compatible with LED lighting when correctly matched to the load type and wattage.
They are designed to suit standard Australian wall boxes, though depth and mounting requirements should be checked for each accessory.
Yes, they are intended for residential use in Australian homes, including new builds and renovations.
Yes, they are designed to integrate seamlessly with Clipsal Solis light switches for a consistent appearance and performance.
Most Solis accessories used in residential applications are rated for standard Australian mains voltage of 230–240 volts AC, depending on the specific product.
Yes, Clipsal Solis accessories are designed to meet relevant AS/NZS electrical safety and performance standards when installed correctly.
