Skip to main content
$35 Prezzee With Clipsal Lighting Bundle | FREE Standard Delivery on Clipsal Orders $330 More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our Cabac - Hour Timer S-Premium 2-Wire | HNS426TM video.

        Cabac | S-Premium Push Button Hour Timer 240V 1.7A | 2-Wire Solid State

        The Cabac HNS426TM is a two-wire push-button hour timer switch rated for 220 to 240V AC operation, built to fit Clipsal Saturn style wall plates. The HNS426TM runs in timer or boost mode and holds a load up to 400VA at a maximum of 1.7A. It carries a user-programmable time-out from 1 to 24 hours in one-hour steps, and it is certified to CISPR15 and AS/NZS 3100.

        Timed loads such as heated towel rails, heated mirrors, and security lighting are often left running long after they are needed, driving up power use. A mechanical or manual switch relies on the occupant to remember, which rarely happens in a busy household or rental. The HNS426TM replaces that switch with a programmable hour timer that shuts the load off on its own. As a two-wire device, it wires into an existing switch position without a neutral at the plate, so it suits retrofit work on Clipsal Saturn wall plates.

        For an electrician, the HNS426TM fits the back of an existing Saturn plate, so a retrofit needs only a single switch swap rather than a full plate change. The boost mode doubles the programmed time up to 24 hours for occasional longer runs, and the unit retains its setting after a power interruption. It arrives set to a one-hour time-out, so it operates on install with no programming step. A momentary remote switch can drive it from a second location up to 50 metres away, which suits larger rooms and dual-entry spaces.

        Features

        • Two-wire design — wires into an existing switch position without a neutral at the wall plate, suiting retrofit work on Saturn plates.
        • Timer and boost modes — a short press runs the programmed time, and a two-second press doubles it up to a 24-hour maximum.
        • Programmable time-out — set any whole-hour delay from 1 to 24 hours by tapping the button while in program mode.
        • Amber LED status — blinks every 5 seconds in timer mode and flashes during the final 10 minutes as an expiry warning.
        • Memory retention — the HNS426TM keeps its programmed time after a power loss, so no reset is needed on restoration.
        • Remote switch compatible — a normally open 240V momentary switch can operate the timer from up to 50 metres away.
        • Saturn plate fit — attaches to the back of Clipsal Saturn style wall plates, with the silver ring and button left in place.
        • Rated load range — handles a maximum 400VA load with a 10VA minimum and a 1.7A current ceiling.
        • Certified — meets CISPR15 and AS/NZS 3100 for Australian and New Zealand fixed-wire installation.
        • Not for inductive loads — the two-wire HNS426TM cannot switch fans, motors, or iron core ballasts.
        • Indoor use only — rated for interior installation and not suitable for outdoor or exposed locations.
        • Out-of-box ready — ships set to a one-hour time-out, so it functions immediately after wiring.

        Where to use

        • Heated towel rails — the HNS426TM times a towel rail up to 400VA so it turns off after a fixed run.
        • Heated mirror demisters — a programmed time-out clears a bathroom mirror without leaving the element on all day.
        • Security lighting — sets perimeter or entry lights to run for a defined period rather than staying on overnight.
        • Garden and decorative lighting — controls feature or garden lighting for a set evening window before auto shut-off.
        • Retrofit switch upgrades — the HNS426TM replaces a plain switch on an existing Saturn plate without a plate change.
        • Rentals and holiday properties — automatic shut-off saves power in spaces where occupants often forget to switch off.

        The HNS426TM is not suitable for fans, motors, or iron core ballasts, which are inductive loads outside a two-wire timer's range. It is rated for indoor installation only and should not be fitted in outdoor or damp exposed locations. Loads below the 10VA minimum may not switch correctly.

        (HNS426TM)

        The Cabac HNS426TM is certified to CISPR15 and AS/NZS 3100. It runs on a 220 to 240V AC 50Hz supply and must be installed as part of a fixed-wire installation by a licensed electrical contractor.

        Installation of the HNS426TM must be carried out by a licensed electrical contractor, as it forms part of a fixed-wire installation. The mechanism attaches to the back of a Clipsal Saturn style wall plate, and the wire strip length is 6.5mm.

        The HNS426TM handles resistive and compatible electronic loads up to 400VA, with a 10VA minimum and a 1.7A ceiling. Typical uses include heated towel rails, heated mirrors, and security or decorative lighting. The unit cannot switch fans, motors, or iron core ballasts.

        A two-wire timer wires in without a neutral at the plate and suits resistive and electronic loads. A three-wire series is required for inductive loads such as fans, motors, and iron core ballasts. This model is the two-wire version.

        Hold the HNS426TM button for 10 seconds to enter program mode, then tap it once per hour of delay, from 1 to 24. The setting stores 10 seconds after the last tap. A two-second press runs boost mode, doubling the set time up to 24 hours.

        A normally open, 240V AC momentary switch can operate the timer from a second location, such as the Clipsal 60PBBP. Remote wiring should not exceed 50 metres, and multiple buttons can be wired in parallel within that limit. Boost mode and programming work from the main button only.

        Cabac warrants the timer against manufacturing and material defects for 12 months from the invoice date. The warranty requires installation by a licensed electrical contractor and operation within the rated specifications. Sparky Direct lists a one-year domestic and commercial warranty on this product.

        The Cabac HNS426TM is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand CABAC
        SKU HNS426TM
        Barcode # 9318674160649
        Package Weight 0.035kg
        TYPE VALUE
        Type Switches
        Rated Current (A) 1.7
        Mounting Flush
        Voltage (V) 220-240

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products