Skip to main content
Get FREE SHIPPING, BUGLE SCREW BOX and $35 PREZZEE when you shop Clipsal this September! Learn More

Search Results:

    There doesn't appear to be any pages that match your search. Try more general keywords, or just ask us!

    Search Results:

    Product Category Suggestions
      Pages

        Learn more by watching our Wago 2210-1207-Single | 2 Ground Conductor Through Terminal With Push Button DIN-Rail 10mm | Single Buy video.

        Wago | 2-Conductor Ground Terminal Block 10mm2 DIN-Rail Push-In | Green-Yellow Single Block

        The Wago 2210-1207 is a two-conductor ground terminal block with a 10mm2 nominal cross-section. This listing supplies one block rather than Wago's twenty-five-piece pack. The 2210-1207 takes 0.5 to 16mm2 copper conductors and mounts on DIN-35 rail at 10mm wide. Conductors go in through a push-button Push-in CAGE CLAMP, and there is a test port in the front face.

        Earth positions on a switchboard rarely land on a round number. Supplied as a single block, the 2210-1207 lets an earth bar be built to the exact position count. The 0.5 to 16mm2 range runs well past the 10mm2 name, so a heavy main earth lands in the same block as the smaller ones. The green-yellow housing marks the position as protective earth against the grey blocks either side.

        An earth connection that cannot be demonstrated becomes a problem at inspection. The test port takes a probe, so continuity is checked with conductors still terminated. Push-button actuation holds spring pressure on the conductor instead of relying on a screw staying torqued. Two jumper slots take a push-in jumper bar, so a set of positions is commoned in one go.

        Features

        • Single block supply — this listing ships one 2210-1207 block, where Wago's standard packaging unit is a box of twenty-five.
        • 10mm2 nominal cross-section — the size the block is built around, with the accepted range sitting either side of it.
        • 0.5 to 16mm2 range — solid or fine-stranded copper conductors, which is 20 to 6 AWG.
        • Solid push-in from 2.5mm2 — solid conductors between 2.5 and 16mm2 push straight into the 2210-1207 without a tool.
        • Ferruled push-in from 4mm2 — fine-stranded conductors with ferrules push in directly between 4 and 10mm2.
        • Operating tool for fine strands — bare fine-stranded conductors need the operating tool, and so does getting any conductor back out.
        • 17 to 19mm strip length — strip that much insulation back before the conductor goes in.
        • Push-button actuation — press the orange button to open the clamp on the 2210-1207.
        • Test port — drop a probe in and check continuity without pulling a conductor out.
        • Two jumper slots — drop in a push-in jumper bar to common blocks along a run.
        • 10mm wide — 67.6mm high, sitting 36.9mm off the top edge of the rail, at 30.9g per block.
        • Green-yellow PA66 housing — polyamide to UL94 V0 flammability class, material group I.

        Where to use

        • Switchboard earth bars — the 2210-1207 mounts on DIN-35 rail in either 35 x 15 or 35 x 7.5, building an earth bar position by position.
        • Control panel earthing — front-entry wiring keeps terminations reachable where gear sits close together on shared rail.
        • Heavy main earths — the range reaches 16mm2, so a main earth terminates without stepping up to a different block.
        • Hazardous area assemblies — approvals under ATEX, IECEx, AEx, CCC, EAC and INMETRO cover Ex eb IIC Gb and Ex eb I Mb.
        • Marine and offshore panels — the 2210-1207 holds approvals from ABS, Bureau Veritas, DNV GL and Lloyds Register.
        • Rolling stock equipment — tested to EN 50155 and EN 61373 for shock and vibration up to 5g.
        • Board top-ups — buying the 2210-1207 singly suits adding one or two earth positions to a board already in service.

        The 2210-1207 is a green-yellow earth block, so it takes earth conductors only and never an active or a neutral. It carries no amp rating, because an earth terminal is sized by the earthing arrangement the electrician is working to, not by a figure on the block. Every run also needs an end plate on the end, ordered separately.

        (2210-1207-Single)

        One block. Wago packs this item in boxes of twenty-five, and this listing breaks the pack so a board can be ordered to the exact number of earth positions it needs.

        0.5 to 16mm2 solid or fine-stranded copper, which is 20 to 6 AWG. The 10mm2 figure in the product name is the nominal cross-section, not the largest conductor the block accepts.

        Solid conductors from 2.5 to 16mm2 and ferruled ones from 4 to 10mm2 push straight in. Bare fine-stranded conductors need the operating tool, and so does getting any conductor back out.

        No, and Wago does not publish one. An earth block is not sized from a terminal rating. The earth conductor size comes from the earthing arrangement the installing electrician is working to.

        10mm of rail per block. It stands 67.6mm high and sits 36.9mm off the top edge of the rail, and weighs 30.9g.

        Yes. Each block has two jumper slots. Drop a push-in jumper bar in and press it down until it hits the backstop, and the blocks are commoned.

        Yes. Wago lists an end and intermediate plate as a required accessory, sold separately. Allow one for the end of each terminal run.

        Hazardous area approvals under ATEX, IECEx, AEx, CCC, EAC and INMETRO for Ex eb IIC Gb and Ex eb I Mb. Marine approvals come from ABS, Bureau Veritas, DNV GL and Lloyds Register, plus EN 50155 rail testing.

        The Wago 2210-1207 is available online from Sparky Direct, with Australia-wide delivery to any state or territory including regional areas. Sparky Direct is an Australian electrical wholesaler established in 2005, supplying more than 500,000 customers with transparent trade pricing.

        100-Day Fuss-Free Returns
        We want you to love what you buy—but if you change your mind, that’s okay too. That’s why Sparky Direct offers a 100-day money-back guarantee.

        • Items must be unused, with all parts, accessories, and original packaging.
        • We can’t accept returns if the product is damaged, incomplete, or not in resalable condition.
        • Proof of purchase is required.
        • Return shipping is the responsibility of the customer. 

        If your item isn’t in its original condition, please contact us before returning it—we might save you time and money.


        All products come with a manufacturer’s or supplier’s warranty

        • Warranty starts from the Invoice Date
        • Some suppliers offer in-home warranties and handle claims directly, so you won’t need to uninstall or return the product. Chat with us to check if your product qualifies.
        • Sparky Direct isn’t responsible for losses caused by product failure.
        • Warranties are void if products aren’t installed by a licensed electrician.

        Damaged or Faulty Goods
        If your order arrives damaged or is faulty, let us know within 24 hours.

        • Sparky Direct will pay for return shipping via an emailed return label.
        • If the fault is confirmed, we will send you a replacement item or provide a refund.

        Contact us via our chat to arrange the return.


        Exclusions
        We can’t accept returns for:

        • Items that have been installed, modified, or used
        • Clearance, End of life, Discontinued, or special order items (unless faulty)
        • All PPE Items
        • Goods returned without original packaging or proof of purchase

        How to Request a Return

        1. Contact our customer service team with your order number.
        2. Confirm it’s eligible under our return or warranty policy.
        3. Pack the item securely and return it using a trackable service.
        4. Once we receive and inspect it, we’ll process your refund or replacement.

        Warranty starts from Invoice Date

        Domestic Use: 1 Year
        Commercial Use: 1 Year
        Warranty Method: Return to Sparky Direct

        Specification Details
        Item Number 2210-1207
        Connection Technology Push-in CAGE CLAMP®
        Clamping Units 2
        Nominal Cross-Section 10 mm²
        Solid Conductor Range 0.5 … 16 mm² / 20 … 6 AWG
        Fine-Stranded Conductor Range 0.5 … 16 mm² / 20 … 6 AWG
        Strip Length 17 … 19 mm / 0.67 … 0.75 inches
        Width 10 mm / 0.394 inches
        Height 67.6 mm / 2.661 inches
        Depth from Upper-Edge of DIN-Rail 36.9 mm / 1.453 inches
        Material Polyamide (PA66)
        Color Green-Yellow
        Weight 30.9 g
        Operating Temperature -60°C to +105°C
        Flammability Class UL94 V0

        These specifications and characteristics outline physical, mechanical, electrical details.

        Brand Wago
        SKU 2210-1207-Single
        Model # 2210-1207
        Barcode # 4055143736084
        Package Weight 0.003kg
        TYPE VALUE
        Type Electrical Accessories
        Brand Wago
        Colour Yellow/Green
        Height (mm) 68
        Width (mm) 10
        Mounting DIN rail
        Weight (g) 3
        Connection Type Push-in Cage Clamp
        Solid Conductor 0.5 - 16mm²
        Fine-Stranded Conductor 0.5 - 16mm²

        Electrical and HVAC products sold by Sparky Direct are intended for installation by licensed and appropriately qualified professionals in accordance with applicable Australian Standards and regulatory requirements. Customers are responsible for ensuring that any product purchased, including any related or associated components, is compatible and suitable for their intended installation and application.

        Sparky Direct does not provide installation advice and does not assess product suitability for individual circumstances unless expressly confirmed in writing. Customers must confirm correct product selection, compatibility, compliance, and suitability with a licensed or appropriately qualified professional prior to purchase.

        Tools sold by Sparky Direct must be used safely and in accordance with the manufacturer’s instructions. Customers are responsible for ensuring they have the necessary knowledge and competence to operate any tool purchased. If you are unsure how to safely or correctly use a tool, do not use it and seek guidance from the manufacturer or a suitably qualified professional.

        Nothing in this clause limits or excludes any rights or guarantees available under the Australian Consumer Law.

        For website terms and conditions https://www.sparkydirect.com.au/terms-of-use

        0.0

        0 Reviews
        5 STARS
        0
        4 STARS
        0
        3 STARS
        0
        2 STARS
        0
        1 STAR
        0
        Be The First To Review This Product!

        Help other Sparky Direct users shop smarter by writing reviews for products you have purchased.

        Write a review

        Related Category Products