Search Results:
Search Results:
Search Results:
Search Results:
Find the best Clipsal Solis Series power points here at Sparky Direct. [ Read More ]
The Clipsal Solis Series sits at the design-led end of the Clipsal power point catalogue. It targets modern residential builds, high-end renovations, and boutique commercial fit-outs where the power outlet contributes to the visible finish.
Each unit is a 10A general-purpose outlet built around a slim cover, flush actuation, and a refined material palette. Smart-ready and USB-C variants extend the range into device-heavy and connected-home installations. All Solis products are made under Schneider Electric's Clipsal brand and supplied through Australian electrical wholesalers including Sparky Direct.
The information below is structured for electricians, builders, designers, and informed retail buyers comparing the range before specifying or ordering.
Clipsal Solis Series power points are premium general-purpose outlets designed for Australian wiring installations. They cover standard 10A GPO applications across kitchens, bedrooms, living areas, home offices, and similar interior zones.
USB-C variants add integrated device charging, while connected socket models work inside the Clipsal Wiser smart ecosystem. Mounting matches standard Australian wall box layouts, though USB-C and smart models may need deeper backboxes.
The range is specified by licensed electricians, builders, developers, architects, and interior designers working on premium projects. Homeowners working through licensed trades also drive demand, particularly during renovations.
Common project types include luxury homes, renovations, display homes, apartments, kitchens, bedrooms, home offices, boutique commercial fit-outs, and executive spaces. The visible nature of the product makes it more suitable for finished interiors than for service zones such as garages or plant rooms.
Low-profile power points reduce visual bulk on the wall. In contemporary interiors with clean lines, large flat surfaces, and minimal joinery detail, a thick traditional GPO can dominate the eye.
A slim cover also coordinates with premium fixtures such as tapware, cabinetry handles, lighting hardware, and joinery pulls. Aligning these elements gives the room a consistent material language and lifts the perceived quality of the build.
The Solis name covers two related product families. Standard Solis delivers a clean matte look at a workable price point. Solis T-Series steps up to material-led finishes and a slimmer cover for architectural and prestige work.
Understanding the difference helps buyers avoid mixing two visually similar but distinct ranges across a project. Switch style, cover thickness, and finish menu all shift between the two.
Standard Solis ships in Matte White and Matte Black. The cover sits at around 4.5mm with flush push-button actuation, giving a minimalist appearance without the higher cost of T-Series materials.
This tier suits contemporary homes, modern apartments, and commercial spaces where a premium look is required but the budget rules out brass or aluminium covers. Matched Solis Series light switches keep the visual language consistent across switches and outlets.
Solis T-Series uses a toggle-style actuator on a slimmer 3.9mm cover. The finish menu covers Brushed Brass, Platinum Aluminium, Ebony Aluminium, and White Ceramic.
T-Series is built for architectural homes, prestige renovations, hospitality projects, and design-led interiors where the GPO is a deliberate feature on a feature wall, bedhead, or kitchen splashback return. Solis T-Series light switches are designed to coordinate with the T-Series outlets.
| Feature | Standard Solis | Solis T-Series |
|---|---|---|
| Switch style | Flush push button | Toggle |
| Cover thickness | About 4.5mm | About 3.9mm |
| Finish options | Matte White, Matte Black | Brushed Brass, Platinum Aluminium, Ebony Aluminium, White Ceramic |
| Material feel | Premium polymer | Metal and ceramic-led finishes |
| Typical project use | Modern homes, apartments, commercial fit-outs | Architectural homes, prestige renovations, hospitality |
| Price positioning | Mid-to-upper | Premium |
| Best-fit buyer | Builders and homeowners wanting a clean modern look | Designers and clients prioritising material quality |
Choosing a Solis finish is a design decision, not a price decision. The right finish reinforces the rest of the room. The wrong one fights the joinery, tapware, and lighting hardware and undermines the build quality.
The guidance below maps finishes to common interior styles. Working through this list room by room before ordering is faster than reworking the schedule mid-fit-off. The full Clipsal Solis collection is worth reviewing alongside cabinetry and tapware samples.
Standard Solis Matte White suits minimalist homes, Scandi interiors, and modern apartments with white walls and pale joinery. Compared with older glossy white GPOs, the matte cover reads as more current and less plastic.
Matte Black sits well against dark joinery, monochrome schemes, and feature walls in deep greys or charcoals. It also works for media rooms and contemporary kitchens where black tapware or handles have been specified.
Plan finishes room by room before ordering. List every visible outlet, switch, dimmer, data outlet, and connected socket, then assign the chosen Solis finish to each.
Mixing ranges late in a project is the main cause of inconsistent fit-outs. A Matte White outlet next to a Brushed Brass switch reads as a mistake even when both are correct products. Reviewing the schedule against the joinery and tapware list at design stage avoids that outcome.
Solis units carry the electrical specifications expected of premium Australian GPOs. The design is visible, but the electrical role is unchanged: a compliant 10A outlet on a residential or light commercial circuit.
The points below cover the detail electricians and specifiers typically check before ordering. Installation itself is licensed electrical work and is summarised separately later on this page.
Standard Solis power points are rated for typical 10A, 230 to 240V AC general-purpose use. They suit lighting circuits, appliance circuits, and the broad mix of plug-in devices found in residential and commercial spaces.
GPO selection must suit circuit design, intended load, and the relevant wiring rules. Higher-load appliances, three-phase loads, or dedicated equipment may require a different outlet type or a dedicated circuit assessed by a licensed electrician.
Power points used in Australia must comply with AS/NZS 3112 for plugs and socket outlets. Fixed installation must follow AS/NZS 3000, the Australian wiring rules, and be completed by a licensed electrician.
Builders, contractors, and commercial buyers often need RCM marking and compliance documentation for handover packs. Sourcing Solis stock through an authorised Australian electrical wholesaler keeps that paperwork chain intact.
Solis products use standard Australian mounting requirements. Wall box depth, bracket type, and model compatibility still need a quick check during planning.
USB-C and connected socket variants carry more electronics behind the cover and may need deeper backboxes than a basic GPO. Electricians should confirm bracket and accessory compatibility from the product datasheet before fit-off, especially on retrofits where the existing wall box may be shallow.
Solis units are mechanism-and-cover systems. The mechanism handles the live electrical work, the cover delivers the visible finish. Buyers can switch finishes on a refurbishment by swapping the cover, provided the underlying mechanism remains compatible and the work is done by a licensed electrician.
USB-C variants integrate the charging circuitry directly into the GPO. The phone, tablet, headphones, or laptop plugs into the wall plate, with no bulky adaptor consuming a socket. USB power points are increasingly specified across both new builds and refurbishments.
The USB-C circuitry sits behind the cover and converts mains power into the low-voltage DC required by the device. The GPO sockets on the same unit continue to function for standard appliance plugs.
Typical applications include bedrooms, kitchens, home offices, study nooks, hotels, short-stay accommodation, and office workstations. Charging speed varies by model and by the device being charged, so the product datasheet is the source of truth for performance figures.
USB-C is worth the upgrade where users charge devices at a fixed location every day. Bedside outlets, kitchen benches, study desks, hospitality rooms, and reception counters are clear wins.
The benefit is convenience and a cleaner wall finish. The standard GPO sockets remain available on the same unit, so device charging does not displace appliance use. Double power points with USB options are popular for benches and bedheads where two devices may charge simultaneously.
Plug-in chargers are cheap and replaceable but they occupy a socket, sit visible on the wall, and contribute to cable clutter. Built-in USB-C tidies the appearance and frees the GPO socket for an appliance.
The trade-off is that a built-in USB-C unit is a fixed electrical product. Replacement or upgrade is licensed electrical work, not a swap-out by hand. For high-use locations the convenience usually justifies the change.
Selected Solis socket models work with Schneider Electric's Wiser system, the same smart platform behind Clipsal Iconic Wiser. This brings remote switching, scheduling, automation, and energy visibility into a premium-finish outlet.
A connected Solis socket pairs with a Wiser Hub and communicates over Zigbee. Once configured, the socket can be switched, scheduled, or grouped through the Wiser app.
Hub and ecosystem requirements should be confirmed before ordering. A connected socket is only useful when the rest of the system, including the hub and supported gateway, has been specified at design stage. Standalone smart power points are also worth comparing for simpler projects.
Smart-ready GPOs future-proof the build. The cabling, mechanism, and hub layout are in place from day one, so adding automation later does not need wall opening or rewiring.
Whole-home automation, energy management, and convenience scheduling are the headline use cases. Planning smart circuits at the design stage avoids expensive retrofits and keeps the visible finish consistent with the rest of the Solis range.
| Attribute | Standard Solis | Connected Solis |
|---|---|---|
| Cost | Mid-to-upper tier | Higher per outlet plus hub cost |
| Setup requirements | Standard wiring | Standard wiring plus Wiser hub and pairing |
| Control options | Local switch only | Local, app, schedule, automation |
| Best-fit applications | Standard premium homes | Smart-home projects and high-end builds |
| Maintenance and future upgrades | Outlet replacement only | Firmware updates and ecosystem expansion |
| Suitability | Standard homes and commercial | Smart homes and integrated builds |
Solis is a design-led specification, not a universal replacement for every job. The decision between Solis and a classic or standard Clipsal power point depends on visibility, budget, and the role of the room in the broader fit-out.
Clipsal classic ranges are value-focused, familiar, and practical. They cover general residential and light commercial use and remain a sensible choice for utility areas, investment properties, and budget-driven projects.
Solis brings a slimmer, more design-conscious look with premium finishes and modern variants. The right answer is usually mixed: classic ranges in service zones, Solis in visible finished interiors. Clipsal Classic power points are a sound base specification for the rest of the property.
Standard power points such as the Clipsal 2000 series cover the bulk of everyday installations. Appearance is conventional, finish options are limited, and there is no integrated USB-C or smart capability in the base model.
Solis adds finish options, USB-C integration, connected socket models, and a clear improvement in cover quality. Standard ranges may still be appropriate for garages, laundries, workshops, rental properties, and like-for-like replacements where visual upgrade is not the priority.
Solis is one of the strongest slimline power point options for buyers prioritising modern aesthetics, low-profile covers, and finish coordination. T-Series in particular is hard to match for material quality on the wall.
The best product for a given home depends on budget, preferred finish, required accessories, and the electrician's installation requirements. There is no single answer for every project, and a quick conversation with the trade specifying the job often resolves the choice.
| Design Type | Best Use Case | Buyer Consideration |
|---|---|---|
| Classic white GPO | Budget projects, utility areas, rentals | Familiar look, lowest cost |
| Slimline plastic GPO | Standard modern interiors | Improved profile without premium finish |
| Designer matte GPO (Standard Solis) | Contemporary homes, apartments, commercial | Matte White or Matte Black, mid-tier cost |
| Premium material GPO (Solis T-Series) | Architectural and prestige projects | Brass, aluminium, ceramic finishes, higher cost |
| Smart and USB-C integrated GPO | Device-heavy and connected homes | Requires planning for hub and backbox depth |
Solis covers more variants than any single room needs. Picking the right combination of finish, gang count, USB-C, and smart features per zone is faster when worked through room by room.
Kitchens benefit from durable, easy-clean finishes and USB-C at the bench. Matte White and Matte Black handle splash and steam without highlighting fingerprints the way gloss surfaces do.
Place outlets clear of appliance zones, near benchtops, and along island bench returns. Wet area placement is governed by the wiring rules and must be confirmed by a licensed electrician.
Bedside charging is the obvious USB-C win in bedrooms. A single USB-C double GPO per bedside replaces the dock and the standalone phone charger.
Living areas and media walls favour double or quad outlets to handle TVs, sound bars, gaming consoles, and lamp circuits. Connected sockets allow scheduled standby control where energy usage matters. Clipsal Iconic power points are a comparable option when budget pushes back from full T-Series.
Hotel rooms, serviced apartments, reception areas, and executive offices benefit from consistent finish selection across every visible outlet. The Solis range supports this with matched switches, dimmers, and accessories.
Boutique retail and hospitality interiors often specify T-Series Brushed Brass or Platinum Aluminium to lift the perceived quality of the space. Clipsal Solis accessories help maintain that consistency where data, USB, or specialist outlets are needed.
Best value is not always the cheapest upfront unit. It accounts for durability, warranty, design outcome, customer expectations, and the cost of premature replacement.
Solis is worth the upgrade in visible, design-sensitive rooms where finish drives perceived quality. Standard or classic ranges remain the better answer for low-visibility areas, service rooms, and budget-driven jobs. 10 Amp power points in the standard range still meet the same compliance baseline.
Solis is widely available through authorised Australian electrical wholesalers. Sparky Direct stocks the range online with trade-aligned pricing, project-friendly quantities, and Australia-wide dispatch.
Solis Series products should be purchased through reputable Australian electrical wholesalers and authorised electrical suppliers. This protects the warranty chain, keeps RCM compliance traceable, and avoids the risk of grey-import or counterfeit stock.
Sparky Direct supplies Clipsal Solis stock, with online ordering and order processing tailored to trade buyers and project-scale purchasing. Checking exact model numbers, finish codes, USB-C or connected socket requirements, and stock availability before ordering avoids fit-off delays.
Competitive pricing, bulk quantities, and online deals are reasonable to chase. Genuine product sourcing and Australian compliance are not.
Unverified marketplaces are a poor source for fixed electrical accessories. Certification, RCM marking, and warranty support may be unclear or absent. Authorised wholesalers such as Sparky Direct address that risk while still offering competitive trade pricing.
Solis power point installation is licensed electrical work in Australia. The notes below cover planning the project safely, not performing the wiring itself.
Non-electricians can safely plan the following: product selection, finish coordination, outlet locations, quantity per room, USB-C and smart requirements, and procurement timing.
Installation, replacement, wiring, and testing must be carried out by a licensed electrician. This is not optional and covers both new builds and refurbishments. Solis switch grids and plates sit in the same compliance category.
A licensed electrician connects active, neutral, and earth conductors to the appropriate terminals on the mechanism. The circuit is tested and verified before energisation. Smart or USB-C variants may require additional configuration or pairing once the electrical work is complete.
This page does not provide step-by-step wiring instructions. Any wiring detail should come from the product datasheet and the licensed electrician carrying out the work.
Safety note: Fixed-wiring electrical work on Solis power points must be carried out by a licensed electrician in accordance with AS/NZS 3000. DIY installation is unsafe, voids warranty, and is illegal under Australian electrical law.
Solis units are designed to last across normal residential and commercial service life. Sensible cleaning and a watch for warning signs keeps them in good condition for the long term.
Use a soft, dry, or slightly damp cloth for routine cleaning. Avoid harsh solvents, abrasive pads, and aggressive cleaning sprays on premium finishes such as Brushed Brass or White Ceramic. These can damage the surface and leave permanent marks.
Cleaning should be done with care around electrical accessories. Never clean a damaged outlet or one showing signs of moisture ingress. Switch the circuit off at the board first where any cleaning beyond a quick wipe is needed.
Any of these signs should be assessed by a licensed electrician promptly. Continued use risks fire, shock, or further damage to connected equipment.
Keep invoices, model numbers, and compliance documentation. These are needed for warranty claims, builder handover packs, and future maintenance.
Storing this paperwork alongside the rest of the project documentation makes the file easier to hand to a property manager, owner, or follow-on trade.
Club Clipsal is Australia's largest electrician community offering trade rewards, business support, and exclusive benefits. When you nominate Sparky Direct as your preferred wholesaler, we automatically apply your Clipsal spend points to your Club Clipsal account daily.
Entry-level offering coaching, mentoring, and training discounts
Unlock exclusive industry tools and networking events
Access Toyota fleet offers and business software discounts
Maximum benefits, including VIP experiences and rewards
1. Sign Up: Create your Club Clipsal account at clipsal.com/club-clipsal or via the iCat mobile app
2. Nominate Sparky Direct: Select Sparky Direct from the wholesaler dropdown menu in your profile
3. Add Email: Enter your Sparky Direct account email address in the membership number field
4. Start Earning: Every dollar spent on Clipsal products earns points automatically
Redeem points from the rewards store, including gift cards, tools, and experiences. Access business summits, product training, and industry networking events. Receive early access to new product launches and special promotions. Connect with fellow electricians via the Club Clipsal community app.
Watch Clipsal 1025-BB | Solis T Series Horizontal Double GPO | Brushed Brass Power Point video
Watch Clipsal 3025USBAC-VW-5Bundle | Iconic Twin Socket Switched Horizontal 1xEx2 USB Charger A+C | 5 Bundle video
Watch Clipsal Iconic 3015-4VW | Quad Power Point 10amp 250v Vivid White 3015/4 VW video
Using the Clipsal Solis range on a large house renovation. Started with the kitchen bench GPOs. The client had selected still new to market 'Carbonized Bamboo' as a primary finish. I felt that the standard white or black GPO would cheapen the kitchen. My client agreed and we made the purchase. She was so excited and impressed, insisted I use Clipsal Solis switches for all light and fan controllers. These are not cheap! But they are a real class act. But in the context of a large reno cost, well sometimes the Project just needs top shelf small details.
They look fantastic. I replaced my 2 gang power points (also Clipsal Saturns - which I've installed in another room) for the 4 gang power points in my kitchen as I have more appliances than points. So I have 2 4 gang power points and they look great, match the light fittings and I'm very happy. I now have these throughout my home - all the light fittings and power points, they look stylish and I've had comments on them from several of my friends.
This charges a phone at a decent rate compared with USB-A, looks tidy and USB-C plug can go in either way. Requires a decent amount of space behind to fit in the power supply, which is understandably a bigger than a normal mech, being 20W. Fine wires to connect are a bit fiddly especially when trying to combine with solid 2.5mm cable but it can be done.
Quality products in stock • Fast Australia-wide delivery • Competitive trade pricing
Browse Clipsal Solis Series Power Points → Get Expert Advice →Yes. They are well suited to most indoor areas when installed in appropriate locations.
Clipsal Solis Series Power Points are available from Sparky Direct, providing convenient Australia-wide delivery and access to a broad range of genuine electrical products.
Consider the room, required features such as USB charging, and confirm suitability with your electrician before purchase.
Return eligibility depends on the seller’s policy and whether the product is unused and in original packaging.
They usually include a manufacturer’s warranty, subject to correct installation and normal use.
They are typically sold individually, allowing flexibility when ordering for projects of any size.
Additional matching units from the Solis Series are generally available through authorised electrical suppliers.
Yes. Clipsal is a well-established brand in Australia, and electricians are generally familiar with its ranges.
Yes. They are built for regular use in busy households and commercial spaces.
Yes. They are commonly selected during renovations and new builds to achieve a modern electrical fit-out.
They are designed for a neat, low-profile appearance when installed correctly.
Yes. They are designed to coordinate with other Clipsal Solis Series products for a consistent finish.
Safety depends on correct installation and proper use. A licensed electrician can advise on additional safety options if required.
Clipsal Solis Series Power Points are modern electrical outlets designed to deliver reliable performance with a refined, architectural appearance for Australian homes and commercial spaces.
Yes. Their smooth, low-profile design makes them easy to wipe down as part of regular cleaning.
They offer a clean, modern look that complements contemporary interiors while maintaining trusted electrical performance.
Power points themselves do not consume electricity, but connected devices may draw standby power.
Standard models are conventional power points and do not offer smart functionality unless paired with external smart devices.
Some Solis Series models include integrated USB charging, depending on the specific product selected.
They are designed to suit standard Australian wall box sizes, subject to site conditions and installer assessment.
Yes. They are commonly used in offices, hospitality settings, and retail spaces where both durability and appearance are important.
Most Clipsal Solis Series Power Points are rated at 10 amps, suitable for general household and light commercial use.
They are designed for standard Australian mains supply of 230–240 volts AC.
Yes. Installation and replacement must be completed by a licensed electrician in accordance with AS/NZS 3000 Wiring Rules.
Yes. They are designed to meet relevant Australian requirements, including AS/NZS 3112 for plugs and socket-outlets, when correctly installed.
